EZ80F91NAA50EG Zilog, EZ80F91NAA50EG Datasheet - Page 222

• Manufacturer Part Number: EZ80F91NAA50EG
• Description: IC ACCLAIM MCU 256KB 144BGA
• Manufacturer: Zilog
• Series: eZ80® AcclaimPlus!™r

Specifications of EZ80F91NAA50EG

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 50MHz
• Connectivity: Ethernet, I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 144-LBGA
• Processor Series: EZ80F91x
• Core: eZ80
• Data Bus Width: 8 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, IrDA, SPI
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 4
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: eZ80F910300ZCOG, eZ80F910200KITG
• Minimum Operating Temperature: - 40 C
• For Use With: 269-4712 - KIT DEV ENCORE 32 SERIES269-4671 - BOARD ZDOTS SBC Z80ACCLAIM PLUS269-4561 - KIT DEV FOR EZ80F91 W/C-COMPILER269-4560 - KIT DEV FOR EZ80F91 W/C-COMPILER
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-4565

PS027001-0707
Data Validity
The data on the SDA line must be stable during the High period of the clock. The High or
Low state of the data line changes only when the clock signal on the SCL line is Low, as
illustrated in
START and STOP Conditions
Within the I
STOP conditions.
SCL is High, indicating a START condition. A Low-to-High transition on the SDA line
while SCL is High defines a STOP condition.
START and STOP conditions are always generated by the master. The bus is considered to
be busy after a START condition. The bus is considered to be free for a defined time after
a STOP condition.
SDA Signal
SCL Signal
SDA Signal
SCL Signal
2
Figure 44. START and STOP Conditions In I
C bus protocol, unique situations arise which are defined as START and
Figure
START Condition
Figure 44
Figure 43. I
43.
S
Data Valid
Data Line
Stable
illustrates a High-to-Low transition on the SDA line while
2
C Clock and Data Relationship
Data Allowed
Change of
2
Product Specification
C Protocol
STOP Condition
I
2
C Serial I/O Interface
eZ80F91 ASSP
P
214