C8051F120-GQ Silicon Laboratories Inc, C8051F120-GQ Datasheet - Page 321
![IC 8051 MCU FLASH 128K 100TQFP](/photos/12/21/122164/c8051f120-gq_sml.jpg)
C8051F120-GQ
Manufacturer Part Number
C8051F120-GQ
Description
IC 8051 MCU FLASH 128K 100TQFP
Manufacturer
Silicon Laboratories Inc
Series
C8051F12xr
Specifications of C8051F120-GQ
Program Memory Type
FLASH
Program Memory Size
128KB (128K x 8)
Package / Case
100-TQFP, 100-VQFP
Core Processor
8051
Core Size
8-Bit
Speed
100MHz
Connectivity
EBI/EMI, SMBus (2-Wire/I²C), SPI, UART/USART
Peripherals
Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
Number Of I /o
64
Ram Size
8.25K x 8
Voltage - Supply (vcc/vdd)
3 V ~ 3.6 V
Data Converters
A/D 8x8b, 8x12b; D/A 2x12b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Processor Series
C8051F1x
Core
8051
Data Bus Width
8 bit
Data Ram Size
8.25 KB
Interface Type
I2C/SMBus/SPI/UART
Maximum Clock Frequency
100 MHz
Number Of Programmable I/os
64
Number Of Timers
5
Operating Supply Voltage
2.7 V to 3.6 V
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
3rd Party Development Tools
PK51, CA51, A51, ULINK2
Development Tools By Supplier
C8051F120DK
Minimum Operating Temperature
- 40 C
On-chip Adc
8-ch x 8-bit or 8-ch x 12-bit
On-chip Dac
2-ch x 12-bit
No. Of I/o's
64
Ram Memory Size
8448Byte
Cpu Speed
100MHz
No. Of Timers
5
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
336-1285 - KIT DEV EMBEDDED MODEM336-1284 - KIT DEV EMBEDDED ETHERNET336-1224 - DEVKIT-F120/21/22/23/24/25/26/27
Eeprom Size
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
336-1223
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
C8051F120-GQ
Manufacturer:
SiliconL
Quantity:
4 353
Company:
Part Number:
C8051F120-GQ
Manufacturer:
Silicon Laboratories Inc
Quantity:
10 000
Company:
Part Number:
C8051F120-GQR
Manufacturer:
PEAK
Quantity:
5 000
Company:
Part Number:
C8051F120-GQR
Manufacturer:
SILICON
Quantity:
2
Company:
Part Number:
C8051F120-GQR
Manufacturer:
Silicon Laboratories Inc
Quantity:
10 000
Part Number:
C8051F120-GQR
Manufacturer:
SILICON LABS/芯科
Quantity:
20 000
Note:
Bit7:
Bit6:
Bit5–4:
Bit3:
Bit2:
Bit1:
Bit0:
SFR Address: TMR2CN:0xC8;TMR3CN:0xC8;TMR4CN:0xC8
SFR Page: TMR2CN: page 0;TMR3CN: page 1;TMR4CN: page 2
TFn
R/W
Bit7
TFn: Timer 2, 3, and 4 Overflow/Underflow Flag.
Set by hardware when either the Timer overflows from 0xFFFF to 0x0000, underflows from
the value placed in RCAPnH:RCAPnL to 0xFFFF (in Auto-reload Mode), or underflows from
0x0000 to 0xFFFF (in Capture Mode). When the Timer interrupt is enabled, setting this bit
causes the CPU to vector to the Timer interrupt service routine. This bit is not automatically
cleared by hardware and must be cleared by software.
EXFn: Timer 2, 3, or 4 External Flag.
Set by hardware when either a capture or reload is caused by a high-to-low transition on the
TnEX input pin and EXENn is logic 1. When the Timer interrupt is enabled, setting this bit
causes the CPU to vector to the Timer Interrupt service routine. This bit is not automatically
cleared by hardware and must be cleared by software.
Reserved.
EXENn: Timer 2, 3, and 4 External Enable.
Enables high-to-low transitions on TnEX to trigger captures, reloads, and control the direc-
tion of the timer/counter (up or down count). If DCENn = 1, TnEX will determine if the timer
counts up or down when in Auto-reload Mode. If EXENn = 1, TnEX should be configured as
a digital input.
0: Transitions on the TnEX pin are ignored.
1: Transitions on the TnEX pin cause capture, reload, or control the direction of timer count
(up or down) as follows:
Capture Mode: ‘1’-to-’0’ Transition on TnEX pin causes RCAPnH:RCAPnL to capture timer
value.
Auto-Reload Mode:
TRn: Timer 2, 3, and 4 Run Control.
This bit enables/disables the respective Timer.
0: Timer disabled.
1: Timer enabled and running/counting.
C/Tn: Counter/Timer Select.
0: Timer Function: Timer incremented by clock defined by TnM1:TnM0
(TMRnCF.4:TMRnCF.3).
1: Counter Function: Timer incremented by high-to-low transitions on external input pin.
CP/RLn: Capture/Reload Select.
This bit selects whether the Timer functions in capture or auto-reload mode.
0: Timer is in Auto-Reload Mode.
1: Timer is in Capture Mode.
Timer 3 and Timer 2 share the T2 and T2EX pins.
EXFn
SFR Definition 23.8. TMRnCN: Timer 2, 3, and 4 Control
R/W
Bit6
DCENn = 0: ‘1’-to-’0’ transition causes reload of timer and sets the EXFn Flag.
DCENn = 1: TnEX logic level controls direction of timer (up or down).
R/W
Bit5
-
R/W
Bit4
-
Rev. 1.4
EXENn
R/W
Bit3
C8051F120/1/2/3/4/5/6/7
TRn
R/W
Bit2
C8051F130/1/2/3
C/Tn
R/W
Bit1
CP/RLn 00000000
R/W
Bit0
Addressable
Reset Value
Bit
321