MC908JL16CSPE Freescale Semiconductor, MC908JL16CSPE Datasheet - Page 37

• Manufacturer Part Number: MC908JL16CSPE
• Description: IC MCU 16K FLASH 8MHZ 32-SDIP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC908JL16CSPE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: I²C, SCI
• Peripherals: LED, LVD, POR, PWM
• Number Of I /o: 26
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-SDIP (0.400", 10.16mm)
• Controller Family/series: HC08
• No. Of I/o's: 26
• Ram Memory Size: 512Byte
• Cpu Speed: 8MHz
• No. Of Timers: 2
• Embedded Interface Type: I2C, SCI
• Rohs Compliant: Yes
• Processor Series: HC08JL
• Core: HC08
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Interface Type: SCI
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 26
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Development Tools By Supplier: FSICEBASE, DEMO908JL16E, M68CBL05CE
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 13 Channel
• For Use With: DEMO908JL16E - BOARD DEMO FOR MC908JL16
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Freescale Semiconductor
NOTES:
Algorithm for Programming
a Row (32 Bytes) of FLASH Memory
The time between each FLASH address change (step 7to step 7),
or the time between the last FLASH address programmed
to clearing PGM bit (step 6 to step 10)
must not exceed the maximum programming
time, t
This row program algorithm assumes the row/s
to be programmed are initially erased.
PROG
max.
Figure 2-4. FLASH Programming Flowchart
MC68HC908JL16 Data Sheet, Rev. 1.1
2
1
3
4
5
6
7
8
READ THE FLASH BLOCK PROTECT REGISTER
WITHIN THE ROW ADDRESS RANGE DESIRED
WRITE ANY DATA TO ANY FLASH ADDRESS
9
WRITE DATA TO THE FLASH ADDRESS
WAIT FOR A TIME, t
TO BE PROGRAMMED
WAIT FOR A TIME, t
WAIT FOR A TIME, t
PROGRAMMING
SET HVEN BIT
SET PGM BIT
COMPLETED
THIS ROW?
N
PROG
10
11
12
13
NVS
PGS
Y
END OF PROGRAMMING
WAIT FOR A TIME, t
WAIT FOR A TIME, t
CLEAR HVEN BIT
CLEAR PGM BIT
FLASH Memory
NVH
RCV
37