MC9S08EL16CTJ Freescale Semiconductor, MC9S08EL16CTJ Datasheet - Page 203

• Manufacturer Part Number: MC9S08EL16CTJ
• Description: MCU 16KB FLASH SLIC 20TSSOP
• Manufacturer: Freescale Semiconductor
• Series: HCS08r

Specifications of MC9S08EL16CTJ

• Core Processor: HCS08
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, LIN, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-TSSOP
• Processor Series: S08EL
• Core: HCS08
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: SCI, SPI, I2C, SLIC
• Maximum Clock Frequency: 200 KHz
• Number Of Programmable I/os: 16
• Number Of Timers: 2
• Operating Supply Voltage: 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWS08
• Development Tools By Supplier: DEMO9S08EL32AUTO, DEMO9S08EL32
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• For Use With: DEMO9S08EL32 - BOARD DEMO FOR 9S08 EL MCUDEMO9S08EL32AUTO - DEMO BOARD EL32 AUTO
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

12.6.1
The HEADER section of all LIN messages is transmitted by the master node in the network and contains
synchronization data, as well as the identifier to define what information is to be contained in the message
frame. Formally, the header is comprised of three parts:
The first two components are present to allow the LIN slave nodes to recognize the beginning of the
message frame and derive the bit rate of the master module.
The SYNCH BREAK allows the slave to see the beginning of a message frame on the bus. The SLIC
module can receive a standard 10-bit break character for the SYNCH BREAK, or any break symbol 10 or
more bit times in length. This encompasses the LIN requirement of 13 or more bits of length for the
SYNCH BREAK character.
The SYNCH BYTE is always a 0x55 data byte, providing five falling edges for the slave to derive the bit
rate of the master node.
The identifier byte indicates to the slave what is the nature of the data in the message frame. This data
might be supplied from either the master node or the slave node, as determined at system design time. The
slave node must read this identifier, check for parity errors, and determine whether it is to send or receive
data in the data field.
More information on the HEADER is contained in
12.6.2
The data field is comprised of standard bytes (eight data bits, no parity, one stop bit) of data, from 0–8
bytes for normal LIN frames and greater than eight bytes for extended LIN frames. The SLIC module will
either transmit or receive these bytes, depending upon the user code interpretation of the identifier byte.
Data is always transmitted into the data field least significant byte (LSB) first.
The SLIC module can automatically handle up to 64 bytes in extended LIN message frames without
significantly changing program execution.
Freescale Semiconductor
1. SYNCH BREAK
2. SYNCH BYTE (0x55)
3. IDENTIFIER FIELD
SYNCH
BREAK
HEADER
LIN Message Frame Header
LIN Data Field
SYNCH
0x55
13 OR MORE BITS (LIN 1.3)
BYTE
IDENT
FIELD
MC9S08EL32 Series and MC9S08SL16 Series Data Sheet, Rev. 3
DATA
FIELD
0
Figure 12-13. Typical LIN MESSAGE FRAME
FIELD
DATA
1
FIELD
DATA
2
Section 12.6.7.1, “LIN Message
FIELD
DATA
DATA
3
FIELD
DATA
4
FIELD
DATA
5
FIELD
DATA
6
Headers.”
FIELD
DATA
7
CHECKSUM
FIELD
205