PIC16F636-E/ST Microchip Technology, PIC16F636-E/ST Datasheet - Page 32

• Manufacturer Part Number: PIC16F636-E/ST
• Description: IC MCU FLASH 2KX14 14TSSOP
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F636-E/ST

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Peripherals: Brown-out Detect/Reset, LVD, POR, WDT
• Number Of I /o: 11
• Program Memory Size: 3.5KB (2K x 14)
• Program Memory Type: FLASH
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 14-TSSOP
• For Use With: AC162057 - MPLAB ICD 2 HEADER 14DIP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Connectivity: -

PIC12F635/PIC16F636/639
2.2.2.5
The PIR1 register contains the interrupt flag bits, as
shown in Register 2-5.
REGISTER 2-5:
DS41232D-page 30
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
Note 1:
R/W-0
EEIF
PIC16F636/639 only.
PIR1 Register
EEIF: EE Write Complete Interrupt Flag bit
1 = The write operation completed (must be cleared in software)
0 = The write operation has not completed or has not been started
LVDIF: Low-Voltage Detect Interrupt Flag bit
1 = The supply voltage has crossed selected LVD voltage (must be cleared in software)
0 = The supply voltage has not crossed selected LVD voltage
CRIF: Cryptographic Interrupt Flag bit
1 = The Cryptographic module has completed an operation (must be cleared in software)
0 = The Cryptographic module has not completed an operation or is Idle
C2IF: Comparator 2 Interrupt Flag bit
1 = Comparator output (C2OUT bit) has changed (must be cleared in software)
0 = Comparator output (C2OUT bit) has not changed
C1IF: Comparator 1 Interrupt Flag bit
1 = Comparator output (C1OUT bit) has changed (must be cleared in software)
0 = Comparator output (C1OUT bit) has not changed
OSFIF: Oscillator Fail Interrupt Flag bit
1 = System oscillator failed, clock input has changed INTOSC (must be cleared in software)
0 = System clock operating
Unimplemented: Read as ‘0’
TMR1IF: Timer1 Overflow Interrupt Flag bit
1 = Timer1 rolled over (must be cleared in software)
0 = Timer1 has not rolled over
R/W-0
LVDIF
PIR1: PERIPHERAL INTERRUPT REQUEST REGISTER 1
W = Writable bit
‘1’ = Bit is set
R/W-0
CRIF
C2IF
R/W-0
(1)
(1)
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-0
C1IF
Note:
Interrupt flag bits are set when an interrupt
condition occurs, regardless of the state of
its corresponding enable bit or the Global
Interrupt Enable bit, GIE of the INTCON
register. User software should ensure the
appropriate interrupt flag bits are clear
prior to enabling an interrupt.
OSFIF
R/W-0
© 2007 Microchip Technology Inc.
x = Bit is unknown
U-0
—
TMR1IF
R/W-0
bit 0