ATTINY861-20SU Atmel, ATTINY861-20SU Datasheet - Page 235

• Manufacturer Part Number: ATTINY861-20SU
• Description: IC MCU AVR 8K FLASH 20MHZ 20SOIC
• Manufacturer: Atmel
• Series: AVR® ATtinyr

Specifications of ATTINY861-20SU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: USI
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Size: 8KB (4K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Cpu Family: ATtiny
• Device Core: AVR
• Device Core Size: 8b
• Frequency (max): 20MHz
• Interface Type: USI
• Total Internal Ram Size: 512Byte
• # I/os (max): 16
• Number Of Timers - General Purpose: 2
• Operating Supply Voltage (typ): 3.3/5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 2.7V
• On-chip Adc: 11-chx10-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 20
• Package Type: SOIC
• Processor Series: ATTINY8x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 16
• Number Of Timers: 2
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT, ATAVRMC320
• Minimum Operating Temperature: - 40 C
• For Use With: ATSTK600 - DEV KIT FOR AVR/AVR32ATAVRBC100 - REF DESIGN KIT BATTERY CHARGER770-1007 - ISP 4PORT ATMEL AVR MCU SPI/JTAG770-1004 - ISP 4PORT FOR ATMEL AVR MCU SPI
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

26.4
26.5
2588E–AVR–08/10
Rev. 2588B – 11/06
Rev. 2588A – 10/06
6. Updated Figures:
7. Added Table:
8. Updated Tables:
9. Updated Register Descriptions:
10. Updated assembly program example in section
11. Updated
1. Updated
2. Updated
1. Initial Revision.
–
–
–
–
–
–
–
–
–
–
–
wise noted).” on page
“Bandgap Voltage vs. Supply Voltage (VCC).” on page 216
“Block Diagram” on page 4
“Clock Distribution” on page 24
“Capacitance for Low-Frequency Crystal Oscillator” on page 29
“Start-up Times for the Internal Calibrated RC Oscillator Clock Selection” on page 28
“Start-up Times for the 128 kHz Internal Oscillator” on page 29
“Active Clock Domains and Wake-up Sources in Different Sleep Modes” on page 36
“Serial Programming Characteristics, T
Otherwise Noted)” on page 193
“TCCR1A – Timer/Counter1 Control Register A” on page 112
“TCCR1C – Timer/Counter1 Control Register C” on page 117
“ADMUX – ADC Multiplexer Selection Register” on page 155
“DC Characteristics. T
“Ordering Information” on page
“Packaging Information” on page
187.
A
= -40°C to +85°C, V
A
227.
= -40°C to +85°C, V
230.
“Write” on page
CC
= 1.8V to 5.5V (unless other-
CC
17.
= 1.8 - 5.5V (Unless
235