PIC18F27J13-I/ML Microchip Technology, PIC18F27J13-I/ML Datasheet - Page 310

• Manufacturer Part Number: PIC18F27J13-I/ML
• Description: IC PIC MCU 128KB FLASH 28QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F27J13-I/ML

• Core Size: 8-Bit
• Program Memory Size: 128KB (64K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Controller Family/series: PIC18
• Cpu Speed: 48MHz
• Digital Ic Case Style: QFN
• Supply Voltage Range: 1.8V To 5.5V
• Embedded Interface Type: I2C, SPI, USART
• Rohs Compliant: Yes
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 4 KB
• Interface Type: I2C, SPI, EUSART
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 19
• Number Of Timers: 8
• Operating Supply Voltage: 2 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: DM164128, DM180021, DM183026-2, DV164131, MA180030, DM183022, DM183032, DV164136, MA180024
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 10 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA180030 - BOARD DEMO PIC18F47J13 FS USBMA180029 - BOARD DEMO PIC18F47J53 FS USB
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC18(L)F2X/4XK22
REGISTER 18-1:
DS41412D-page 310
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1-0
Note 1:
R/W-0
C1ON
Comparator output requires the following three conditions: C1OE = 1, C1ON = 1 and corresponding port
TRIS bit = 0.
C1ON: Comparator C1 Enable bit
1 = Comparator C1 is enabled
0 = Comparator C1 is disabled
C1OUT: Comparator C1 Output bit
If C1POL = 1 (inverted polarity):
C1OUT = 0 when C1V
C1OUT = 1 when C1V
If C1POL = 0 (non-inverted polarity):
C1OUT = 1 when C1V
C1OUT = 0 when C1V
C1OE: Comparator C1 Output Enable bit
1 = C1OUT is present on the C1OUT pin
0 = C1OUT is internal only
C1POL: Comparator C1 Output Polarity Select bit
1 = C1OUT logic is inverted
0 = C1OUT logic is not inverted
C1SP: Comparator C1 Speed/Power Select bit
1 = C1 operates in normal power, higher speed mode
0 = C1 operates in low-power, low-speed mode
C1R: Comparator C1 Reference Select bit (non-inverting input)
1 = C1V
0 = C1V
C1CH<1:0>: Comparator C1 Channel Select bit
00 = C12IN0- pin of C1 connects to C1V
01 = C12IN1- pin of C1 connects to C1V
10 = C12IN2- pin of C1 connects to C1V
11 = C12IN3- pin of C1 connects to C1V
C1OUT
R-0
CM1CON0: COMPARATOR 1 CONTROL REGISTER
IN
IN
+ connects to C1V
+ connects to C12IN+ pin
W = Writable bit
‘1’ = Bit is set
R/W-0
C1OE
IN
IN
IN
IN
+ > C1V
+ < C1V
+ > C1V
+ < C1V
REF
C1POL
R/W-0
IN
IN
IN
IN
output
Preliminary
-
-
-
-
IN
IN
IN
IN
(1)
-
-
-
-
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-1
C1SP
R/W-0
C1R
 2010 Microchip Technology Inc.
x = Bit is unknown
R/W-0
C1CH<1:0>
R/W-0
bit 0