PIC18F27J13-I/ML Microchip Technology, PIC18F27J13-I/ML Datasheet - Page 321

• Manufacturer Part Number: PIC18F27J13-I/ML
• Description: IC PIC MCU 128KB FLASH 28QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F27J13-I/ML

• Core Size: 8-Bit
• Program Memory Size: 128KB (64K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Controller Family/series: PIC18
• Cpu Speed: 48MHz
• Digital Ic Case Style: QFN
• Supply Voltage Range: 1.8V To 5.5V
• Embedded Interface Type: I2C, SPI, USART
• Rohs Compliant: Yes
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 4 KB
• Interface Type: I2C, SPI, EUSART
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 19
• Number Of Timers: 8
• Operating Supply Voltage: 2 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: DM164128, DM180021, DM183026-2, DV164131, MA180030, DM183022, DM183032, DV164136, MA180024
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 10 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA180030 - BOARD DEMO PIC18F47J13 FS USBMA180029 - BOARD DEMO PIC18F47J53 FS USB
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

EXAMPLE 19-1:
 2010 Microchip Technology Inc.
#include "p18cxxx.h"
/**************************************************************************/
/*Set up CTMU *****************************************************************/
/**************************************************************************/
void setup(void)
{ //CTMUCONH/1 - CTMU Control registers
/**************************************************************************/
//Set up AD converter;
/**************************************************************************/
}
//
// ADCON2
ADCON2bits.ADFM=1;
ADCON2bits.ACQT=1;
ADCON2bits.ADCS=2;
// ADCON1
ADCON1bits.PVCFG0 =0;
ADCON1bits.NVCFG1 =0;
ADCON0bits.CHS=2;
ADCON0bits.ADON=1;
ANSELAbits.ANSA2=1;
TRISAbits.TRISA2=1;
CTMUCONH = 0x00;
CTMUCONL = 0x90;
//CTMU continues to run when emulator is stopped,CTMU continues
//to run in idle mode,Time Generation mode disabled, Edges are blocked
//No edge sequence order, Analog current source not grounded, trigger
//output disabled, Edge2 polarity = positive level, Edge2 source =
//source 0, Edge1 polarity = positive level, Edge1 source = source 0,
//CTMUICON - CTMU Current Control Register
CTMUICON = 0x01;
TRISA=0x04;
// Configure AN2 as an analog channel
ADCON0
SETUP FOR CTMU CALIBRATION ROUTINES
//make sure CTMU is disabled
//0.55uA, Nominal - No Adjustment
//set channel 2 as an input
// Results format 1= Right justified
// Acquition time 7 = 20TAD 2 = 4TAD 1=2TAD
// Clock conversion bits 6= FOSC/64 2=FOSC/32
// Select ADC channel
// Turn on ADC
// Vref+ = AVdd
// Vref- = AVss
Preliminary
PIC18(L)F2X/4XK22
DS41412D-page 321