PIC16LC926-I/PT Microchip Technology, PIC16LC926-I/PT Datasheet - Page 109
![IC MCU CMOS 20MHZ 8K W/LCD64TQFP](/photos/6/81/68123/c04-066_pf_sml.jpg)
PIC16LC926-I/PT
Manufacturer Part Number
PIC16LC926-I/PT
Description
IC MCU CMOS 20MHZ 8K W/LCD64TQFP
Manufacturer
Microchip Technology
Series
PIC® 16Cr
Specifications of PIC16LC926-I/PT
Core Size
8-Bit
Program Memory Size
14KB (8K x 14)
Core Processor
PIC
Speed
20MHz
Connectivity
I²C, SPI
Peripherals
Brown-out Detect/Reset, LCD, POR, PWM, WDT
Number Of I /o
25
Program Memory Type
OTP
Ram Size
336 x 8
Voltage - Supply (vcc/vdd)
2.5 V ~ 5.5 V
Data Converters
A/D 5x10b
Oscillator Type
External
Operating Temperature
-40°C ~ 85°C
Package / Case
64-TFQFP
Controller Family/series
PIC16C
No. Of I/o's
25
Ram Memory Size
336Byte
Cpu Speed
20MHz
No. Of Timers
3
Interface
I2C, SPI
Embedded Interface Type
I2C, SPI
Rohs Compliant
Yes
Processor Series
PIC16LC
Core
PIC
Data Bus Width
8 bit
Data Ram Size
336 B
Interface Type
I2C, SPI
Maximum Clock Frequency
20 MHz
Number Of Programmable I/os
25
Number Of Timers
1 x 16 bit
Operating Supply Voltage
2.5 V to 5.5 V
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
3rd Party Development Tools
52715-96, 52716-328, 52717-734
Development Tools By Supplier
ICE2000
Minimum Operating Temperature
- 40 C
On-chip Adc
5 bit
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
Lead Free Status / Rohs Status
Details
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
PIC16LC926-I/PT
Manufacturer:
Microchip Technology
Quantity:
10 000
Part Number:
PIC16LC926-I/PT
Manufacturer:
MIC
Quantity:
20 000
12.5
The PIC16C925/926 family has nine sources of
interrupt:
• External interrupt RB0/INT
• TMR0 overflow interrupt
• PORTB change interrupts
• A/D Interrupt
• TMR1 overflow interrupt
• TMR2 matches period interrupt
• CCP1 interrupt
• Synchronous serial port interrupt
• LCD module interrupt
The interrupt control register (INTCON) records individ-
ual interrupt requests in flag bits. It also has individual
and global interrupt enable bits.
A global interrupt enable bit, GIE (INTCON<7>),
enables (if set) all unmasked interrupts, or disables (if
cleared) all interrupts. When bit GIE is enabled, and an
interrupt’s flag bit and mask bit are set, the interrupt will
vector immediately. Individual interrupts can be dis-
abled through their corresponding enable bits in vari-
ous registers. Individual interrupt bits are set,
regardless of the status of the GIE bit. The GIE bit is
cleared on RESET.
FIGURE 12-10:
(pins RB7:RB4)
Note:
2001 Microchip Technology Inc.
Interrupts
Individual interrupt flag bits are set, regard-
less of the status of their corresponding
mask bit, or the GIE bit.
ADIF
ADIE
TMR1IF
TMR1IE
SSPIF
SSPIE
CCP1IF
CCP1IE
TMR2IF
TMR2IE
INTERRUPT LOGIC
LCDIF
LCDIE
Preliminary
TMR0IF
TMR0IE
GIE
INTF
INTE
RBIF
RBIE
PEIF
PEIE
The “return from interrupt” instruction, RETFIE, exits
the interrupt routine as well as sets the GIE bit, which
re-enables interrupts.
The RB0/INT pin interrupt, the RB port change interrupt
and the TMR0 overflow interrupt flags are contained in
the INTCON register.
The peripheral interrupt flags are contained in the spe-
cial function register, PIR1. The corresponding inter-
rupt enable bits are contained in special function
register, PIE1, and the peripheral interrupt enable bit is
contained in special function register, INTCON.
When an interrupt is responded to, the GIE bit is
cleared to disable any further interrupts, the return
address is pushed onto the stack and the PC is loaded
with 0004h. Once in the Interrupt Service Routine the
source(s) of the interrupt can be determined by polling
the interrupt flag bits. The interrupt flag bit(s) must be
cleared in software before re-enabling interrupts to
avoid recursive interrupts.
For external interrupt events, such as the RB0/INT pin
or RB Port change interrupt, the interrupt latency will be
three or four instruction cycles. The exact latency
depends
(Figure 12-11). The latency is the same for one or two
cycle instructions. Individual interrupt flag bits are set,
regardless of the status of their corresponding mask
bit, PEIE bit, or the GIE bit.
when
PIC16C925/926
the
interrupt
Wake-up (If in SLEEP mode)
DS39544A-page 107
Interrupt to CPU
event
occurs