PIC16LC924-04I/L Microchip Technology, PIC16LC924-04I/L Datasheet - Page 95

• Manufacturer Part Number: PIC16LC924-04I/L
• Description: IC MCU OTP 4KX14 LCD DVR 68PLCC
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16LC924-04I/L

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Connectivity: I²C, SPI
• Peripherals: LCD, POR, PWM, WDT
• Number Of I /o: 25
• Program Memory Size: 7KB (4K x 14)
• Program Memory Type: OTP
• Ram Size: 176 x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 6 V
• Data Converters: A/D 5x8b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 68-PLCC
• Core: PIC
• Processor Series: PIC16LC
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 8 MHz
• Data Ram Size: 176 B
• Data Rom Size: 176 B
• On-chip Adc: 8 bit, 5 Channel
• Number Of Programmable I/os: 25
• Number Of Timers: 3
• Operating Supply Voltage: 2.5 V to 6 V
• Mounting Style: SMD/SMT
• Height: 4.06 mm
• Interface Type: I2C, SPI
• Length: 24.33 mm
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 6 V
• Supply Voltage (min): 2.5 V
• Width: 24.33 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

13.1
The LCD module has 3 possible clock source inputs
and supports static, 1/2, 1/3, and 1/4 multiplexing.
13.1.1
The clock sources for the LCD timing generation are:
• Internal RC oscillator
• Timer1 oscillator
• System clock divided by 256
The first timing source is an internal RC oscillator which
runs at a nominal frequency of 14 kHz. This oscillator
provides a lower speed clock which may be used to
continue running the LCD while the processor is in
sleep. The RC oscillator will power-down when it is not
selected or when the LCD module is disabled.
FIGURE 13-8: LCD CLOCK GENERATION
1997 Microchip Technology Inc.
crystal oscillator
Nominal F
TMR1 32 kHz
Internal RC oscillator
F
OSC
LCD Timing
TIMING CLOCK SOURCE SELECTION
RC
= 14 kHz
256
CS1:CS0
4
2
LMUX1:LMUX0
Static
1/2
1/3
1/4
The second source is the Timer1 external oscillator.
This oscillator provides a lower speed clock which may
be used to continue running the LCD while the proces-
sor is in sleep. It is assumed that the frequency pro-
vided on this oscillator will be 32 kHz. To use the
Timer1 oscillator as a LCD module clock source, it is
only necessary to set the T1OSCEN (T1CON<3>) bit.
The third source is the system clock divided by 256.
This divider ratio is chosen to provide about 32 kHz
output when the external oscillator is 8 MHz. The
divider is not programmable. Instead the LCDPS regis-
ter is used to set the LCD frame clock rate.
All of the clock sources are selected with bits CS1:CS0
(LCDCON<3:2>). Refer to Figure 13-1 for details of the
register programming.
4-bit Programmable
LCDPS<3:0>
Prescaler
data bus
internal
PIC16C9XX
32
LMUX1:LMUX0
Ring Counter
DS30444E - page 95
1,2,3,4