PIC18LF2420-I/SP Microchip Technology, PIC18LF2420-I/SP Datasheet - Page 199

• Manufacturer Part Number: PIC18LF2420-I/SP
• Description: IC MCU FLASH 8KX16 28-DIP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18LF2420-I/SP

• Core Size: 8-Bit
• Program Memory Size: 16KB (8K x 16)
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 25
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-DIP (0.300", 7.62mm)
• Controller Family/series: PIC18
• No. Of I/o's: 25
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 768Byte
• Cpu Speed: 40MHz
• No. Of Timers: 4
• Package: 28SPDIP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 2.5|3.3|5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 25
• Interface Type: I2C/SPI/USART
• On-chip Adc: 10-chx10-bit
• Number Of Timers: 4
• Core: PIC
• Processor Series: PIC18LF
• Maximum Clock Frequency: 40 MHz
• Data Ram Size: 768 B
• Data Rom Size: 256 B
• Mounting Style: Through Hole
• Height: 3.3 mm
• Length: 34.67 mm
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2 V
• Width: 7.24 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

FIGURE 17-27:
FIGURE 17-28:
© 2008 Microchip Technology Inc.
SDA
SCL
SEN
S
BCLIF
SSPIF
S
BCLIF
SSPIF
SDA
SCL
SEN
BUS COLLISION DURING START CONDITION (SCL = 0)
BRG RESET DUE TO SDA ARBITRATION DURING START CONDITION
SDA pulled low by other master.
Reset BRG and assert SDA.
‘0’
‘0’
Set SEN, enable Start
sequence if SDA = 1, SCL = 1
SCL = 0 before BRG time-out,
bus collision occurs. Set BCLIF.
Less than T
BRG
SDA = 0, SCL = 1
PIC18F2420/2520/4420/4520
SDA = 0, SCL = 1
SDA = 0, SCL = 1,
set SSPIF
T
Set SEN, enable Start
sequence if SDA = 1, SCL = 1
BRG
S
Set S
T
BRG
T
BRG
Set SSPIF
SCL = 0 before SDA = 0,
bus collision occurs. Set BCLIF.
SCL pulled low after BRG
time-out
Interrupt cleared
in software
Interrupts cleared
in software
‘0’
‘0’
‘0’
DS39631E-page 197