MC9S12XA256CAL Freescale Semiconductor, MC9S12XA256CAL Datasheet - Page 560

• Manufacturer Part Number: MC9S12XA256CAL
• Description: IC MCU 256K FLASH 112-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12XA256CAL

• Core Processor: HCS12X
• Core Size: 16-Bit
• Speed: 80MHz
• Connectivity: EBI/EMI, I²C, IrDA, LIN, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 91
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 2.35 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• No. Of I/o's: 91
• Eeprom Memory Size: 4KB
• Ram Memory Size: 16KB
• Cpu Speed: 80MHz
• No. Of Timers: 1
• No. Of Pwm Channels: 8
• Digital Ic Case Style: LQFP
• Rohs Compliant: Yes
• Processor Series: S12XA
• Core: HCS12
• Data Bus Width: 16 bit
• Data Ram Size: 16 KB
• Interface Type: CAN, I2C, SCI, SPI
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 91
• Number Of Timers: 12
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Development Tools By Supplier: EVB9S12XDP512E
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2 (10 bit, 16 Channel)
• Package: 112LQFP
• Family Name: HCS12
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 2.5|5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Chapter 14 Voltage Regulator (S12VREG3V3V5)
14.3.2.3
The VREGAPICL register allows the configuration of the VREG_3V3 autonomous periodical interrupt
features.
560
APICLK
Reset
APIFE
Field
APIE
APIF
7
2
1
0
W
R
APICLK
Autonomous Periodical Interrupt Clock Select Bit — Selects the clock source for the API. Writable only if
APIFE = 0; APICLK cannot be changed if APIFE is set by the same write operation.
0 Autonomous periodical interrupt clock used as source.
1 Bus clock used as source.
Autonomous Periodical Interrupt Feature Enable Bit — Enables the API feature and starts the API timer
when set.
0 Autonomous periodical interrupt is disabled.
1 Autonomous periodical interrupt is enabled and timer starts running.
Autonomous Periodical Interrupt Enable Bit
0 API interrupt request is disabled.
1 API interrupt will be requested whenever APIF is set.
Autonomous Periodical Interrupt Flag — APIF is set to 1 when the in the API configured time has elapsed.
This flag can only be cleared by writing a 1 to it. Clearing of the flag has precedence over setting.
Writing a 0 has no effect. If enabled (APIE = 1), APIF causes an interrupt request.
0 API timeout has not yet occurred.
1 API timeout has occurred.
Autonomous Periodical Interrupt Control Register (VREGAPICL)
0
7
Figure 14-4. Autonomous Periodical Interrupt Control Register (VREGAPICL)
= Unimplemented or Reserved
0
0
6
Table 14-4. VREGAPICL Field Descriptions
MC9S12XDP512 Data Sheet, Rev. 2.21
0
0
5
0
0
4
Description
0
0
3
APIFE
0
2
Freescale Semiconductor
APIE
0
1
APIF
0
0