HD64F2218UTF24 Renesas Electronics America, HD64F2218UTF24 Datasheet - Page 260

• Manufacturer Part Number: HD64F2218UTF24
• Description: IC H8S MCU FLASH 128K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of HD64F2218UTF24

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 24MHz
• Connectivity: SCI, SmartCard, USB
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• For Use With: 3DK2218-SS - KIT DEV H8S/2218 WINDOWS SIDESHW
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

7.4.13
If the DTE bit for the channel currently operating is cleared to 0, the DMAC stops on completion
of the 1-byte or 1-word transfer in progress. DMAC operation resumes when the DTE bit is set to
1 again. In full address mode, the same applies to the DTME bit. Figure 7.22 shows the procedure
for forcibly terminating DMAC operation by software.
Rev.7.00 Dec. 24, 2008 Page 204 of 698
REJ09B0074-0700
Figure 7.21 Example of Procedure for Continuing Transfer on Channel Interrupted by
Figure 7.22 Example of Procedure for Forcibly Terminating DMAC Operation
Forced Termination of DMAC Operation
transfer on interrupted
Forced termination
Forced termination
Clear DTE bit to 0
Transfer continues
Set DTME bit to 1
Resumption of
of DMAC
DTME = 0
channel
DTE = 1
Yes
No
[1]
[1]
[2]
NMI Interrupt
[1] Clear the DTE bit in DMABCRL to 0.
If you want to prevent interrupt generation after
forced termination of DMAC operation, clear the
DTIE bit to 0 at the same time.
Transfer ends
[1]
[2]
Check that DTE = 1 and
DTME = 0 in DMABCRL
Write 1 to the DTME bit.