D12363VF33V Renesas Electronics America, D12363VF33V Datasheet - Page 449

• Manufacturer Part Number: D12363VF33V
• Description: IC H8S/2363 MCU ROMLESS 128QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of D12363VF33V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 84
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• For Use With: YR0K42378FC000BA - KIT EVAL FOR H8S/2378
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

9.13.1
The individual bits of PFDDR specify input or output for the pins of port F.
PFDDR cannot be read; if it is, an undefined value will be read.
Note:
Bit
7
6
5
4
3
2
1
0
*
Bit Name
PF7DDR
PF6DDR
PF5DDR
PF4DDR
PF3DDR
PF2DDR
PF1DDR
PF0DDR
Port F Data Direction Register (PFDDR)
PF7DDR is initialized to 1 in modes 1, 2, and 4, and to 0 in mode 7.
Initial Value
1/0 *
0
0
0
0
0
0
0
R/W
W
W
W
W
W
W
W
W
Description
•
Pin PF7 functions as the φ output pin when the
corresponding PFDDR bit is set to 1, and as an
input port when the bit is cleared to 0.
Pin PF6 functions as the AS output pin when ASOE
is set to 1. When ASOE is cleared to 0, pin PF6 is
an I/O port and its function can be switched with
PF6DDR.
Pins PF5 and PF4 are automatically designated as
bus control outputs (RD and HWR).
Pin PF3 functions as the LWR output pin when
LWROE is set to 1. When LWROE is cleared to 0,
pin PF3 is an I/O port and its function can be
switched with PF3DDR.
Pins PF2 and PF1 function as bus control output
pins (LCAS and UCAS) when the appropriate bus
controller settings are made. When the CS output
enable bits (CS6E and CS5E) are set to 1, they
function as CS outputs. When the CS output enable
bits (CS6E and CS5E) are cleared to 0, pins PF2
and PF1 are I/O ports and their functions can be
switched with the corresponding PFDDR bits.
Pin PF0 functions as a bus control input pin (WAIT)
when the appropriate bus controller settings are
made. Otherwise, this pin is an output port when the
corresponding PFDDR bit is set to 1, and an input
port when the bit is cleared to 0.
•
Pin PF7 functions as the φ output pin when the
corresponding PFDDR bit is set to 1, and as an
input port when the bit is cleared to 0.
Pins PF6 to PF0 are I/O ports, and their functions
can be switched with PFDDR.
Modes 1, 2, 4, and 7 (when EXPE = 1)
Mode 7 (when EXPE = 0)
Rev.6.00 Mar. 18, 2009 Page 389 of 980
Section 9 I/O Ports
REJ09B0050-0600