AT91FR40162SB-CU-999 Atmel, AT91FR40162SB-CU-999 Datasheet - Page 123

• Manufacturer Part Number: AT91FR40162SB-CU-999
• Description: IC MCU 32BIT RISC 121BGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91FR40162SB-CU-999

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 75MHz
• Connectivity: EBI/EMI, UART/USART
• Peripherals: WDT
• Number Of I /o: 32
• Program Memory Size: 2MB (1M x 16)
• Program Memory Type: FLASH
• Ram Size: 256K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 121-BGA
• Data Bus Width: 32 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details

18.4.3
18.4.4
18.4.5
18.4.6
6410B–ATARM–12-Jan-10
Receiver Ready
Parity Error
Framing Error
Time-out
Figure 18-5. Synchronous Mode: Character Reception
When a complete character is received, it is transferred to the US_RHR and the RXRDY status
bit in US_CSR is set. If US_RHR has not been read since the last transfer, the OVRE status bit
in US_CSR is set.
Each time a character is received, the receiver calculates the parity of the received data bits, in
accordance with the field PAR in US_MR. It then compares the result with the received parity bit.
If different, the parity error bit PARE in US_CSR is set.
If a character is received with a stop bit at low level and with at least one data bit at high level, a
framing error is generated. This sets FRAME in US_CSR.
This function allows an idle condition on the RXD line to be detected. The maximum delay for
which the USART should wait for a new character to arrive while the RXD line is inactive (high
level) is programmed in US_RTOR (Receiver Time-out). When this register is set to 0, no time-
out is detected. Otherwise, the receiver waits for a first character and then initializes a counter
which is decremented at each bit period and reloaded at each byte reception. When the counter
reaches 0, the TIMEOUT bit in US_CSR is set. The user can restart the wait for a first character
with the STTTO (Start Time-out) bit in US_CR.
Calculation of time-out duration:
Example: 8-bit, parity enabled 1 stop
Sampling
RXD
SCK
True Start Detection
D0
Duration
D1
= Value x
D2
D3
4
D4
x
Bit period
D5
AT91FR40162SB
D6
D7
Parity Bit
Stop Bit
123