C8051F302 Silicon Laboratories Inc, C8051F302 Datasheet - Page 19

• Manufacturer Part Number: C8051F302
• Description: IC 8051 MCU 8K FLASH 11MLP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F30xr

Specifications of C8051F302

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: SMBus (2-Wire/I²C), UART/USART
• Peripherals: POR, PWM, Temp Sensor, WDT
• Number Of I /o: 8
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x8b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 11-VQFN
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: I2C, SMBus, UART
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 8
• Number Of Timers: 16 bit
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No

1.6.
An on-chip Programmable Counter/Timer Array (PCA) is included in addition to the three 16-bit general purpose
counter/timers. The PCA consists of a dedicated 16-bit counter/timer time base with three programmable cap-
ture/compare modules. The PCA clock is derived from one of six sources: the system clock divided by 12, the system
clock divided by 4, Timer 0 overflows, an External Clock Input (ECI), the system clock, or the external oscillator
clock source divided by 8. The external clock source selection is useful for real-time clock functionality, where the
PCA is clocked by an external source while the internal oscillator drives the system clock.
Each capture/compare module can be configured to operate in one of six modes: Edge-Triggered Capture, Software
Timer, High Speed Output, 8- or 16-bit Pulse Width Modulator, or Frequency Output. Additionally, Capture/Compare
Module 2 offers watchdog timer (WDT) capabilities. Following a system reset, Module 2 is configured and enabled
in WDT mode. The PCA Capture/Compare Module I/O and External Clock Input may be routed to Port I/O via the
Digital Crossbar.
Programmable Counter Array
SYSCLK/12
SYSCLK/4
Timer 0 Overflow
SYSCLK
External Clock/8
ECI
Capture/Compare
Module 0
Figure 1.8. PCA Block Diagram
CLOCK
MUX
PCA
Digital Crossbar
Port I/O
Capture/Compare
16-Bit Counter/Timer
Rev. 2.3
Module 1
C8051F300/1/2/3/4/5
Capture/Compare
Module 2
19