MPC564CVR40 Freescale Semiconductor, MPC564CVR40 Datasheet - Page 1191

• Manufacturer Part Number: MPC564CVR40
• Description: IC MPU 32BIT W/CODE COMP 388PBGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC564CVR40

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 40MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 56
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 388-BGA
• Processor Series: MPC5xx
• Core: PowerPC
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: CAN, JTAG, QSPI, SCI, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 56
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2 (10 bit, 32 Channel)
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Freescale Semiconductor
0
ADDRESS OFFSETS
1
0x30XXWA
0x30XXWC
0x30XXWE
0x30XXW0
0x30XXW2
0x30XXW4
0x30XXW6
0x30XXW8
2
0
0
0
3
1
1
1
0
0
cChannel Function Select
cHost Sequence
cHost Service Request
cChannel Priority
Channel Interrupt Enable
Channel Interrupt Status
= Written By RCPU
= Written By TPU
1. The TPU does not check the value of LINK_CHANNEL_COUNT. If this parameter is
2. MAX_COUNT may be written at any time by the host RCPU, but if the value written is
NAME
0
START_LINK_
not >0 and < 8, results are unpredictable.
< PERIOD_COUNT, a period or pulse-width accumulation is terminated. If this
happens, the number of periods over which the accumulation is performed will not
correspond to MAX_COUNT.
CHANNEL
1
MPC561/MPC563 Reference Manual, Rev. 1.2
2
MAX_COUNT
ACCUM_RATE
Figure D-24. PPWA Parameters
3
xxxx – PPWA Function Number
Assigned during microcode assembly. See
00 – Accumulate 24-Bit Periods, No Links
01 – Accumulate 16-Bit Periods, Links
10 – Accumulate 24-Bit Pulse Widths, No Links
11 – Accumulate 16-Bit Pulse Widths, Links
00 – Not Used
01 – Not Used
10 – Initialize
11 – Not Used
00 – Channel Disabled
01 – Low Priority
10 – Medium Priority
11 – High Priority
0 – Channel Interrupt Disabled
1 – Channel Interrupt Enabled
0 – Channel Interrupt Not Asserted
1 – Channel Interrupt Asserted
LINK_CHANNEL_
4
PARAMETER RAM
CONTROL BITS
COUNT
= Written by RCPU and TPU
= Unused Parameters
5
2
6
LAST_ACCUM
1
PPWA_LW
ACCUM
7
OPTIONS
BITS
8
9
CHANNEL_CONTROL
PERIOD_COUNT
10 11 12 13 14 15
PPWA_UB
W = Channel Number
For address offsets: XX =41 for
TPU_A, 45 for TPU_B
YY = 40 for TPU_A,
Table D-1
0x30YY1C – 0x30YY1E
0x30YY0C – 0x30YY12
0x30YY18 – 0x30YY1A
0x30YY14 – 0x30YY16
ADDRESSES
0x30YY0A
0x30YY20
TPU3 ROM Functions
Param 0
Param 1
Param 2
Param 3
Param 4
Param 5
Param 6
Param 7
D-39