M306N5FCTFP Renesas Electronics America, M306N5FCTFP Datasheet - Page 47

• Manufacturer Part Number: M306N5FCTFP
• Description: IC M16C MCU FLASH 100QFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/6Nr

Specifications of M306N5FCTFP

• Core Processor: M16C/60
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, I²C, IEBus, SIO, UART/USART
• Peripherals: DMA, WDT
• Number Of I /o: 87
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 5K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 26x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Chapter 2 Addressing Modes
label
Program counter relative
• If the jump length specifier (.length)
is (.S)...
the base address plus the value
indicated by displacement (dsp)—
added not including the sign bits—
constitutes the effective address.
This addressing can be used in JMP
instruction.
• If the jump length specifier (.length) is
(.B) or (.W)...
the base address plus the value indicated
by displacement (dsp)—added including
the sign bits—constitutes the effective
address.
However, if the addition resulted in
exceeding 00000
above bit 21 are ignored, and the address
returns to 00000
This addressing can be used in JMP and
JSR instructions.
16
16
- FFFFF
or FFFFF
16
16
, the bits
.
29
*1 The base address is the (start address of instruction + 2).
If the dsp value is positive
If the specifier is (.B), -128
If the specifier is (.W), -32768
*2 The base address varies with each instruction.
If the dsp value is negative
dsp
dsp
dsp
Base address
Base address
2.4 Special Instruction Addressing
+0
dsp +7
label
label
label
dsp
dsp
Memory
Memory
+127
+32767