SDSCC-096G-000000 SanDisk, SDSCC-096G-000000 Datasheet - Page 15

• Manufacturer Part Number: SDSCC-096G-000000
• Description: SSD 2.5" SATA 96GB
• Manufacturer: SanDisk
• Series: SSD SATAr

Specifications of SDSCC-096G-000000

• Memory Size: 96GB
• Memory Type: FLASH - Nand
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: FFD-25-SATA-96-C-P; FFD-25-SATA-96-C-P

4.
4.1. Optional Jumper Setting
The SSD has an optional header located on the back panel that supports the following options:


The Write Protect jumper may not be modified when the unit is powered on.
4.1.1.
Positions 1 - 2 of the header are reserved (used for fault output). No jumper or signal should be
placed over these positions.
4.1.2.
When a jumper is placed between positions 3 - 4 of the header, the SSD is write protected.
4.1.3.
When a jumper is placed between positions 5 - 6 of the header, the SSD erases the media.
Note: The Secure Erase jumper overrides the Write-Protect jumper and erases the media.
4.2. Interface Connectors
The SSD interface cable consists of four conductors in two differential pairs, plus three ground
connections. There are total of 7 pins in the signal segment and 15 pins in the power segment.
All pins are in a single row, with a 1.27 mm (0.050”) pitch.
7
Secure Erase
Write Protect
SSD S
Reserved Jumper
Write-Protect Jumper Settings
Secure Erase Jumper
ERIAL
Figure 4: SSD Serial ATA 2.5” Write Protect Jumper Settings
1
2
4
3
ATA 2.5” D
5
6
Product Specification and User Manual
SECURE ERASE
WRITE PROTECT
Reserved
RIVE
C
ONFIGURATION
SSD (Formerly FFD) Serial ATA 2.5"
42-PS-0605-00 Rev. 1.3