SDSNC-096G-000000 SanDisk, SDSNC-096G-000000 Datasheet - Page 20

• Manufacturer Part Number: SDSNC-096G-000000
• Description: SSD 2.5" SATA 96GB
• Manufacturer: SanDisk
• Series: SSD SATAr

Specifications of SDSNC-096G-000000

• Memory Size: 96GB
• Memory Type: FLASH - Nand
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: FFD-25-SATA-96-N-C-P; FFD-25-SATA-96-N-C-P

Notes: 1. Before every overwrite process, all blocks are erased as per the flash specification.
4.4.1.3 Sanitize Interrupt
The Sanitize Interrupt command has the following characteristics:





Note: Please contact the M-Systems sales offices for information regarding the available
4.4.1.4 Auto-Resume Sanitize Feature
When Auto-Resume is enabled (the factory default setting), if a power interruption occurs during
a Sanitize procedure the FDD restarts the Sanitize procedure on the next power-up.
If the Sanitize Interrupt command is active during power-up, the unit first completes the Sanitize
procedure that was initiated before the power interruption. If the Sanitize Interrupt command is
12
USA-Army 380-19
Erase the media and overwrite with random
data, erase and overwrite with a character,
then erase and overwrite with complement
of the character.
NISPOMSUP Chap 8, Sect. 8-501
Overwrite all locations with a character, its
complement, and then random data.
IREC (IRIG) 106:
Erase the media, overwrite with 0x55,
erase, overwrite with 0xAA, erase.
Erase the media and overwrite with random
data (different data each time) 21 times.
Erase the media and overwrite with random
data (different data each time) 381 times
The SSD receives the Sanitize Interrupt at any time.
The Sanitize Interrupt initiates the immediate execution of the default Sanitize procedure.
The default factory-preset Sanitize procedure is to erase the entire media and leave it empty
(to perform the Security Erase option).
If unit is powered up with Sanitize Interrupt active, the default Sanitize procedure is
launched immediately.
If the Sanitize Interrupt is still active upon completion of the default Sanitize procedure, the
SSD restarts the default Sanitize procedure. This cycle is repeated indefinitely for as long as
the Sanitize Interrupt command is active.
hardware Sanitize Interrupt options.
2. Blocks subjected to the Sanitize procedure are all blocks not registered in the original
manufacturer‟s Bad Block Table.
Operation
Product Specification and User Manual
Command
Master
0xC1
0xD0
0xD0
0xD5
0x41
0x01
Char
0x55
0x15
0x7F
1
SSD (Formerly FFD) Serial ATA 2.5"
Parameter
~Char
0xAA
0x7F
Char
0x00
2
42-PS-0605-00 Rev. 1.3
~Char
0x7F
0x01
0x00
0x00
3