SC16C852IBS,151 NXP Semiconductors, SC16C852IBS,151 Datasheet - Page 39
![no-image](/images/manufacturer_photos/0/4/487/nxp_semiconductors_sml.jpg)
SC16C852IBS,151
Manufacturer Part Number
SC16C852IBS,151
Description
IC UART DUAL W/FIFO 32HVQFN
Manufacturer
NXP Semiconductors
Type
IrDAr
Datasheet
1.SC16C852IBS128.pdf
(60 pages)
Specifications of SC16C852IBS,151
Number Of Channels
2, DUART
Package / Case
32-VQFN Exposed Pad, 32-HVQFN, 32-SQFN, 32-DHVQFN
Features
Programmable
Fifo's
128 Byte
Protocol
RS485
Voltage - Supply
2.5 V ~ 3.3 V
With Auto Flow Control
Yes
With Irda Encoder/decoder
Yes
With False Start Bit Detection
Yes
With Modem Control
Yes
With Cmos
Yes
Mounting Type
Surface Mount
Voltage
1.65 V ~ 1.95 V
Data Rate
5 Mbps
Supply Voltage (max)
3.3 V
Supply Voltage (min)
2.5 V
Supply Current
2 mA
Maximum Operating Temperature
+ 85 C
Minimum Operating Temperature
- 40 C
Mounting Style
SMD/SMT
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
935283099151 SC16C852IBS-S
NXP Semiconductors
SC16C852_1
Product data sheet
7.22 Advanced Feature Control Register 1 (AFCR1)
Table 34.
[1]
Bit
7
6:5
4
3
2
1
0
It takes 4 XTAL1 clocks to reset the device.
Symbol
AFCR1[7]
AFCR1[6:5]
AFCR1[4]
AFCR1[3]
AFCR1[2]
AFCR1[1]
AFCR1[0]
Advanced Feature Control Register 1 register bits description
Rev. 01 — 31 August 2009
Description
Concurrent write. When this bit is set the host can write concurrently to
the same register of all channel.
logic
reserved
Sleep RXLow. Program RX input to be edge-sensitive or level-sensitive.
reserved
RTS/CTS mapped to DTR/DSR. Switch the function of RTS/CTS to
DTR/DSR.
SReset. Software Reset
TSR Interrupt. Select TSR interrupt mode
logic 0 = Normal operation
logic 1 = Concurrent Write operation
logic 0 = RX input is level-sensitive. If RXA/RXB pin is LOW, the UART
will not go to sleep. Once the UART is in Sleep mode, it will wake up if
RXA/RXB pin goes LOW.
logic 1 = RX input is edge-sensitive. UART will go to sleep even if
RXA/RXB pin is LOW, and will wake up when RXA/RXB pin toggles.
logic 0 = RTS and CTS signals are used for hardware flow control.
logic 1 = DTR and DSR signals are used for hardware flow control.
RTS and CTS retain their functionality.
A write to this bit will reset the UART. Once the UART is reset this bit is
automatically set to 0.
logic 0 = transmit empty interrupt occurs when transmit FIFO falls
below the trigger level or becomes empty.
logic 1 = transmit empty interrupt occurs when transmit FIFO falls
below the trigger level, or becomes empty and the last stop bit has
been shifted out of the Transmit Shift Register.
Dual UART with 128-byte FIFOs and IrDA encoder/decoder
[1]
SC16C852
© NXP B.V. 2009. All rights reserved.
39 of 60