GS-BT2416C1DBAT1 STMicroelectronics, GS-BT2416C1DBAT1 Datasheet - Page 28

• Manufacturer Part Number: GS-BT2416C1DBAT1
• Description: BOARD DEMO CLASS 1 W/SERIAL PORT
• Manufacturer: STMicroelectronics
• Type: Bluetoothr

Specifications of GS-BT2416C1DBAT1

• Contents: Board
• Processor Series: STLC2500
• Wireless Frequency: 2.4 GHz to 2.5 GHz
• Interface Type: RS-232, USB
• For Use With/related Products: GS-BT2416C1.A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-5793

AT command
A.21
A.22
A.23
Note:
28/38
AT+BTMACROSTOP
Stop the programmable status and store the commands sequence inserted so far into the
flash memory of the module. If the sequence is larger then memory block available an error
will be raised. The command will be available only if a device is set to COMMAND MODE
and only if it come after an AT+BTMACROSTART command.
Due to internal time needed to write a flash memory area a little
time delay is possible before any return value.
AT+BTMACROCLEAR
Erase any possible commands sequence present into the flash memory. This operation is
non-reversible.
AT+BTCONNECT
Initiate an SPP connection to a remote Bluetooth
successfully established the command returns an OK message and GPIO1 is set to high.
It is possible to specify a number of attempts and a time interval between any retry. It also
possible to stop a sequence of connections retry changing the state of GPIO3 (as with the
startup Macro).
When connected with another device the module become “Non-Connectable” and “Non-
Discoverable”.
Syntax: AT+BTMACROSTOP
Return value: <OK, ERROR>
Syntax: AT+BTMACROCLEAR
Return value: <OK, ERROR>
®
device. When the connection has been
GS-BT2416C1.AT1