DVK-WLM400 Laird Technologies, DVK-WLM400 Datasheet - Page 32

• Manufacturer Part Number: DVK-WLM400
• Description: DEVELOPMENT KIT WISM+
• Manufacturer: Laird Technologies
• Type: Transceiverr

Specifications of DVK-WLM400

• Frequency: 2.4GHz
• Processor Series: WISM+
• Silicon Manufacturer: Laird Technologies
• Kit Application Type: Communication & Networking
• Application Sub Type: Wi-Fi Intelligent Serial
• Kit Contents: PCB, 2x Antennas, Power Adapter, USB Cable, RS-232
• Rohs Compliant: Yes
• For Use With/related Products: WLM400
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

WISM+ Host PC
8 Using the Performance Tool in Infrastructure Mode
The TX Performance tool in WIF.exe is used to send packets to a UDP socket at a destination IP address.
In the example shown below, the WISM+ (in infrastructure mode NOT bridged) is wirelessly connected to the Access
Point which has an Ethernet connection to the Remote PC. The Remote PC is running dboard.exe.
See the following page on how to set up the WISM+ configuration.
There are too many combinations of the above diagram to discuss. The Access Point could be a Router, the Remote
PC might not be connected directly to the Access Point or Router, but over a network. The PCs could have Static IP
addresses, etc.
Refer to section: “
transmit packets on the WISM+ Host PC and dboard.exe operation on the Remote PC.
© Laird Technology 2010
Using the Performance Tool in Ad-Hoc Mode
Com Port
(Optional)
USB
“TX Performance test”
“dboard.exe”
WIF.exe
Infrastructure Mode
DHCP- No Secutiry
SSID “TEST”
WISM+
Dev Kit
Firewall & Virus Disabled
Remote PC
” for a description of using WIF.exe to
Version 1.00
WISM+ DVK MANUAL
802.11b/g
Wireless
connection
Ethernet
SSID “TEST”
No security
Access
Point
Page 27