X09-009PKC-RA Digi International/Maxstream, X09-009PKC-RA Datasheet - Page 26

• Manufacturer Part Number: X09-009PKC-RA
• Description: MOD RF 900MHZ 9600BPS RS232/485
• Manufacturer: Digi International/Maxstream
• Series: XStream™r

Specifications of X09-009PKC-RA

• Function: Transceiver, FHSS
• Modulation Or Protocol: FHSS, FSK
• Frequency: 900MHz
• Applications: ISM
• Interface: RS-232, RS-485
• Sensitivity: -110dBm
• Power - Output: 20dBm (100mW)
• Data Rate - Maximum: 10 kbps
• Voltage - Supply: 7 V ~ 18 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -

© 2006 MaxStream, Inc. Confidential & Proprietary
XStream‐PKG‐R™ RS‐232/485 RF Modem – Product Manual v5.x00 [2006.02.24]
BK (Serial Break Passing) Command
BO (Serial Break Timeout) Command
BT (Guard Time Before) Command
CB (Connection Duration Timeout) Command
CC (Command Sequence Character) Command
<Serial Interfacing> Pass a serial break condition
on the DI pin to the DO pin of another modem.
<Serial Interfacing> DO pin will return to default
after no serial break status information is
received during the timeout period.
Use with BK parameter = 1.
<Command Mode Options> BT Command is
used to set the DI pin silence time that must
precede the command sequence character (CC
Command) of the AT Command Mode Sequence.
Refer to the AT Commands section [p19] to view
the default AT Command Mode sequence.
<Networking & Security> Set/Read the
maximum amount of time an exclusive
connection between a base and remote modem
in a point-to-multipoint network is sustained. The
remote modem will disconnect when this timeout
expires.
<Command Mode Options> CC Command is
used to set the ASCII character to be used
between Guard Times of the AT Command Mode
Sequence (BT+ CC + AT). The AT Command
Mode Sequence activates AT Command Mode
(from Idle Mode).
Refer to the AT Commands section [p19] to view
the default AT Command Mode sequence.
AT Command: ATBT
Binary Command: 0x04 (4 decimal)
Parameter Range: 2 – 0xFFFF
Default Parameter Value: 0x0A (10 decimal)
Number of bytes returned: 2
Related Commands: AT (Guard Time After), CC
(Command Sequence Character)
AT Command: ATCC
Binary Command: 0x13 (19 decimal)
Parameter Range: 0x20 – 0x7F
Default Parameter Value: 0x2B (ASCII “+” sign)
Number of bytes returned: 1
Related Commands: AT (Guard Time After), BT
(Guard Time Before)
AT Command: ATBK
Binary Command: 0x2E (46 decimal)
Parameter Range: 0 – 1
Default Parameter Value: 0
Number of bytes returned: 1
Related Commands: BO (Serial Break Timeout)
Minimum Firmware Version Required: 4.30
AT Command: ATBO
Binary Command: 0x30 (48 decimal)
Parameter Range: 0 – 0xFFFF [x 1 second]
Default Parameter Value: 0
Number of bytes returned: 2
Related Commands: BK (Serial Break Passing)
Minimum Firmware Version Required: 4.30
AT Command: ATCB
Binary Command: 0x33 (51 decimal)
Parameter Range: 0x01 – 0xFFFF
Default Parameter Value: 0x28 (4d seconds)
Number of bytes returned: 2
Related Commands: CE (Connection Inactivity
Timeout), DC (Disconnect), MD (RF Mode)
Minimum Firmware Version Required: 4.30
Parameter
0
1
[x 100 milliseconds]
[x 100 milliseconds]
Configuration
disable
enable
26