X09-009PKC-RA Digi International/Maxstream, X09-009PKC-RA Datasheet - Page 40

• Manufacturer Part Number: X09-009PKC-RA
• Description: MOD RF 900MHZ 9600BPS RS232/485
• Manufacturer: Digi International/Maxstream
• Series: XStream™r

Specifications of X09-009PKC-RA

• Function: Transceiver, FHSS
• Modulation Or Protocol: FHSS, FSK
• Frequency: 900MHz
• Applications: ISM
• Interface: RS-232, RS-485
• Sensitivity: -110dBm
• Power - Output: 20dBm (100mW)
• Data Rate - Maximum: 10 kbps
• Voltage - Supply: 7 V ~ 18 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -

5. RF Communication Modes
© 2006 MaxStream, Inc. Confidential & Proprietary
XStream‐PKG‐R™ RS‐232/485 RF Modem – Product Manual v5.x00 [2006.02.24]
Network configurations covered in this chapter are described in terms of the following:
The following table provides a summary of the network configurations supported.
Table 5.1.
Point-to-Point
Point-to-Multipoint
Peer-to-Peer
* Assume default values for parameters not listed. Profiles do not reflect addressing implementations.
** AM (Auto‐set MY) Command must be issued through a terminal program such as the one incorporated in
the X‐CTU ‘Terminal’ tab.
• Network Topology (Point-to-Point, Point-to-Multipoint or Peer-to-Peer)
• RF Communication Type (Basic or Acknowledged)
• RF Mode (Streaming, Repeater, Acknowledged or Multi-Streaming)
Summary of network configurations supported by the XStream RF Modem
Definition
Sample Network Profile *
(Broadcast Communications)
Sample Network Profile *
(Acknowledged Communications)
Basic Communication RF Modes
Acknowledged Communication RF Mode
Definition
Sample Network Profile *
(Basic Communications)
Sample Network Profile *
(Acknowledged Communications)
Basic Communication RF Modes
Acknowledged Communication RF Modes
Definition
Sample Network Profile *
(Basic Communications)
Sample Network Profile *
(Acknowledged Communications)
Basic Communication RF Mode
Acknowledged Communication RF Mode
An RF data link between two modems.
Use default values for all modems.
All Modems: ATAM [auto-set MY (Source Address) parameter] **
Streaming Mode [p42], Repeater Mode [p43]
Acknowledged Mode [p46]
RF data links between one base and multiple remotes.
Base:
Remotes:
Base:
Remotes:
Streaming Mode [p42], Repeater Mode [p43]
Acknowledged Mode [p46], Multi-Streaming Mode [p48]
Modems remain synchronized without use of a master/server. Each
modem shares the roles of master and slave. MaxStream’s peer-to-
peer architecture features fast synch times (35ms to synchronize
modems) and fast cold start times (50ms before transmission).
Use default values for all modems.
All Modems: ATAM [auto-set MY (Source Address) parameter] **
Streaming Mode [p42]
Acknowledged Mode [p46]
ATDT FFFF [set Destination Address to 0xFFFF]
ATMY 0 [set Source Address to 0x00]
ATDT FFFF [set Destination Address to 0xFFFF]
ATAM [auto-set MY (Source Address) parameter] **
ATDT 0 [set Destination Address to 0x00]
ATMY 0 [set Source Address to 0x00]
ATDT FFFF [set Destination Address to 0xFFFF]
ATRR 3 [set number of Retries to 3]
ATAM [auto-set MY (Source Address) parameter] **
ATDT 0 [set Destination Address to 0x00]
ATRR 3 [set number of Retries to 3]
ATDT FFFF [set Destination Address to 0xFFFF]
ATRR 3 [set number of Retries to 3]
40