X09-009PKC-RA Digi International/Maxstream, X09-009PKC-RA Datasheet - Page 53

• Manufacturer Part Number: X09-009PKC-RA
• Description: MOD RF 900MHZ 9600BPS RS232/485
• Manufacturer: Digi International/Maxstream
• Series: XStream™r

Specifications of X09-009PKC-RA

• Function: Transceiver, FHSS
• Modulation Or Protocol: FHSS, FSK
• Frequency: 900MHz
• Applications: ISM
• Interface: RS-232, RS-485
• Sensitivity: -110dBm
• Power - Output: 20dBm (100mW)
• Data Rate - Maximum: 10 kbps
• Voltage - Supply: 7 V ~ 18 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -

© 2006 MaxStream, Inc. Confidential & Proprietary
XStream‐PKG‐R™ RS‐232/485 RF Modem – Product Manual v5.x00 [2006.02.24]
OEM Labeling Requirements
Antenna Usage
Label Warning
Antenna Warning
RF Exposure
Figure A.1.
Contains FCC ID: OUR9XSTREAM
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Figure A.2.
Contains FCC ID: OUR-24XSTREAM
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference and (2) this device must accept
any interference received, including interference that may cause undesired operation.
The preceding statement must be included as a CAUTION statement in manuals for OEM products
to alert users on FCC RF Exposure compliance.
MaxStream radio modems are pre-FCC approved for use in fixed base station and mobile
applications. As long as the antenna is mounted at least 20 cm (8 in) from nearby persons, the
application is considered a mobile application. If the antenna will be mounted closer than 20 cm
to nearby persons, then the application is considered “portable” and requires an additional test
performed on the final product. This test is called the Specific Absorption Rate (SAR) testing and
measures the emissions from the radio modem and how they affect the person.
Over 100 additional antennas have been tested and are approved for use with MaxStream 900
MHz Radio Modems (including “Mag Mount”, “Dome”, “Multi-path” and “Panel” antennas).
Because of the large number of approved antennas, MaxStream requests that you send specific
information about an antenna you would like to use with the modem and MaxStream will
evaluate whether the antenna is covered under our FCC filing.
WARNING
WARNING:
WARNING:
Required FCC Label for OEM products containing 9XStream (900 MHz) RF Modem
Required FCC Label for OEM products containing 24XStream (2.4 GHz) RF Modem
The Original Equipment Manufacturer (OEM) must ensure that FCC labeling
requirements are met. This includes a clearly visible label on the outside of the
final product enclosure that displays the contents shown in the figure below.
This device has been tested with Reverse Polarity SMA connectors with the
antennas listed in Tables A.1 & A.2 of Appendix A. When integrated in OEM
products, fixed antennas require installation preventing end-users from replacing
them with non-approved antennas. Antennas not listed in the tables must be
tested to comply with FCC Section 15.203 (unique antenna connectors) and Section
15.247 (emissions).
This equipment is approved only for mobile and base station transmitting devices,
separation distances of (i) 20 centimeters or more for antennas with gains < 6 dBi
or (ii) 2 meters or more for antennas with gains ≥ 6 dBi should be maintained
between the antenna of this device and nearby persons during operation. To
ensure compliance, operation at distances closer than this is not recommended.
53