X09-009PKC-RA Digi International/Maxstream, X09-009PKC-RA Datasheet - Page 55

• Manufacturer Part Number: X09-009PKC-RA
• Description: MOD RF 900MHZ 9600BPS RS232/485
• Manufacturer: Digi International/Maxstream
• Series: XStream™r

Specifications of X09-009PKC-RA

• Function: Transceiver, FHSS
• Modulation Or Protocol: FHSS, FSK
• Frequency: 900MHz
• Applications: ISM
• Interface: RS-232, RS-485
• Sensitivity: -110dBm
• Power - Output: 20dBm (100mW)
• Data Rate - Maximum: 10 kbps
• Voltage - Supply: 7 V ~ 18 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -

© 2006 MaxStream, Inc. Confidential & Proprietary
XStream‐PKG‐R™ RS‐232/485 RF Modem – Product Manual v5.x00 [2006.02.24]
European Compliance (2.4 GHz only)
Restrictions
Important Note
The 24XStream has been certified for use in several European countries. For a complete list, refer
to http://www.maxstream.net.
If the 24XStream modems are incorporated into a product, the manufacturer must ensure
compliance of the final product to the European harmonized EMC and low-voltage/safety
standards. A Declaration of Conformity must be issued for each of these standards and kept on
file as described in Annex II of the R&TTE Directive. Furthermore, the manufacturer must
maintain a copy of the XStream user manual documentation and ensure the final product does
not exceed the specified power ratings, antenna specifications, and/or installation requirements
as specified in the user manual. If any of these specifications are exceeded in the final product, a
submission must be made to a notified body for compliance testing to all required standards.
OEM Labeling Requirements
The ‘CE’ marking must be affixed to a visible location on the OEM product.
Figure A.3.
The CE mark shall consist of the initials “CE” taking the following form:
Furthermore, since the usage of the 2400 – 2483.5 MHz band is not harmonized throughout
Europe, the Restriction sign must be placed to the right of the ‘CE’ marking as shown below. See
the R&TTE Directive, Article 12 and Annex VII for more information
Figure A.4.
France – France imposes restrictions on the 2.4 GHz band. Go to www.art-telecom.Fr or contact
MaxStream for more information.
Norway – Norway prohibits operation near Ny-Alesund in Svalbard. More information can be
found at the Norway Posts and Telecommunications site (www.npt.no).
24XStream Declarations of Conformity
MaxStream has issued Declarations of Conformity for the 24XStream modems concerning
emissions, EMC and safety. Files are located in the ‘documentation’ folder of the MaxStream CD.
MaxStream does not list the entire set of standards that must be met for each country.
MaxStream customers assume full responsibility for learning and meeting the required guidelines
for each country in their distribution market. For more information relating to European
compliance of an OEM product incorporating the 24XStream modem, contact MaxStream, or refer
to the following web sites:
CEPT ERC 70-03E – Technical Requirements, European restrictions and general requirements:
Available at www.ero.dk/
R&TTE Directive – Equipment requirements, placement on market: Available at
• If the CE marking is reduced or enlarged, the proportions given in the above graduated
• The CE marking must have a height of at least 5mm except where this is not possible on
• The CE marking must be affixed visibly, legibly, and indelibly.
drawing must be respected.
account of the nature of the apparatus.
CE Labeling Requirements
CE Label Required on OEM Equipment
>5
(Taller than 5 mm)
www.ero.dk/
55