TEA5766UK/N1-G ST-Ericsson Inc, TEA5766UK/N1-G Datasheet - Page 56

• Manufacturer Part Number: TEA5766UK/N1-G
• Description: IC FM STEREO RADIO W/RDS 25WLCSP
• Manufacturer: ST-Ericsson Inc

Specifications of TEA5766UK/N1-G

• Frequency: 76MHz ~ 108MHz
• Sensitivity: -111dBm
• Modulation Or Protocol: FM
• Applications: FM Radio Receiver
• Current - Receiving: 17mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Voltage - Supply: 2.6 V ~ 3.6 V
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 25-WLCSP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Memory Size: -
• Data Rate - Maximum: -
• Other names: 935281564023

NXP Semiconductors
17. References
TEA5766UK_1
Product data sheet
16.3.3 Rework
16.3.4 Cleaning
In general, rework is not recommended. By rework we mean the process of removing the
chip from the substrate and replacing it with a new chip. If a chip is removed from the
substrate, most solder balls of the chip will be damaged. In that case it is recommended
not to re-use the chip again.
Device removal can be done when the substrate is heated until it is certain that all solder
joints are molten. The chip can then be carefully removed from the substrate without
damaging the tracks and solder lands on the substrate. Removing the device must be
done using plastic tweezers, because metal tweezers can damage the silicon. The
surface of the substrate should be carefully cleaned and all solder and flux residues
and/or underfill removed. When a new chip is placed on the substrate, use the flux
process instead of solder on the solder lands. Apply flux on the bumps at the chip side as
well as on the solder pads on the substrate. Place and align the new chip while viewing
with a microscope. To reflow the solder, use the solder profile shown in Application Note
AN10365 “Surface mount reflow soldering description” .
Cleaning can be done after reflow soldering.
[1]
[2]
[3]
[4]
[5]
[6]
[7]
The I
BS EN 62106 — Specification of the radio data system (RDS) for VHF/FM sound
broadcasting in the frequency range from 87.5 to 108 MHz, 2001.
Data sheet TEF6892H — Car radio integrated signal processor, 2003 Oct 21.
JESD22-C101C — JEDEC standard for charged-device model ESD test method.
Data sheet SAA6588 — RDS/RBDS pre-processor, 2002 Jan 14.
EN 55020 — Sound and television broadcast receivers and associated
equipment-Immunity characteristics- Limits and methods of measurement, May
2002.
RDS: The Radio Data System — Dietmar Kopitz and Bev Marks.
2
C-bus specification — version 2.1, January 2000.
Rev. 01 — 22 March 2007
TEA5766UK
Stereo FM radio + RDS
© NXP B.V. 2007. All rights reserved.
55 of 59