WISMC03BI Laird Technologies, WISMC03BI Datasheet - Page 15

• Manufacturer Part Number: WISMC03BI
• Description: MODULE LAN 802.11B/G BISM
• Manufacturer: Laird Technologies
• Series: EZURiOr

Specifications of WISMC03BI

• Frequency: 2.4GHz
• Data Rate - Maximum: 1Mbps
• Modulation Or Protocol: 802.11 b/g
• Applications: AMR, Automotive, ISM
• Power - Output: 15dBm
• Sensitivity: -86dBm
• Voltage - Supply: 3.3 V ~ 5.5 V
• Current - Transmitting: 250mA
• Data Interface: Connector, 50 Pin, DF-12
• Memory Size: 64Mbyte Flash, 16MByte SRAM
• Antenna Connector: U.FL
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Wireless Frequency: 2.412 GHz to 2.484 GHz
• Interface Type: UART
• Board Size: 22.8 mm x 33.8 mm x 7.6 mm
• Modulation: BPSK, CCK, DSSS, QPSK
• Security: WEP 64/128, WPA-PSK, WPA2, TKIP, AES-CCMP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Receiving: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

WISMC03BI
Wireless LAN Module / Device Server
FIRMWARE
FEATURES
15 www.lairdtech.com
COMMAND SET
The module supports the following commands.
Details of the complete command list are provided in a separate Programming Guide, the following are a
provided as an overview.
COMMAND
UARTMODIFY
SECURITY
KEY
AUTHENTICATE
SEARCH
ATTACH
DETACH
BSSTYPE
CHANNEL
MACADDRESS
POWERSAVE
GETRSSI
GETREGION
SETREGION
INITADCCHANNEL
READADCCHANNEL
CFGGPIOOUTPUT
CFGGPIOINPUT
SETGPIO
CLEARGPIO
READGPIO
PARAMETERS
Baud: Baud rate (9600, 19200, 38400,
57600, 115200, 230400, 921600)
Length: 8 bits (only allowed option)
Parity: Even / Odd
Stop: 1, 2
Flag: none, WEP
Keystring: 10 or 26 Hex digits setting 64
or 128 bit encryption key
Flag: Open or closed
Name: Alphanumeric AP SSID
Channel: 1-11 (Europe), 1-13 (US),
and 1-14 (Japan)
Flag: Powersave mode (0,1,2,5)
OPERATION
Configures the UART parameters.
Selects use of WEP security.
(See firmware release notes for other
security parameters)
Sets the WEP encryption key.
(See firmware release notes for other
security parameters)
Selects authentication strategy to use in
combination with WEP.
Performs a search for local Access Points.
Attaches the module to the specified
Access Point.
Detaches the module from the current
Access Point.
Selects either AP or ad-hoc mode
of operation.
Sets the operating channel for an
ad-hoc network.
Reads back the MAC address of
the module.
Selects the power save mode.
Reports signal strength information for the
current AP connection.
Gets the current region for which the
module is configured.
Sets the region.
Initializes the ADC for a particular channel.
Reads the specified ADC channel.
Set PIO line(s) to be outputs
Set PIO line(s) to be inputs
Set output line(s) high
Set output line(s) low
Reads state of input GPIO line(s)
Laird Technologies