IS-L0102-IS15ABCP4CF NKK Switches, IS-L0102-IS15ABCP4CF Datasheet - Page 17

• Manufacturer Part Number: IS-L0102-IS15ABCP4CF
• Description: BOARD LOGIC IS15ABCP4CF & AT548
• Manufacturer: NKK Switches

Specifications of IS-L0102-IS15ABCP4CF

• Accessory Type: Logic Board
• For Use With/related Products: Standard SmartSwitch™
• For Use With: 360-2330 - SMARTSWITCH STD RED/GRN LED
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7850 East Gelding Drive • Scottsdale, AZ 85260-3420
Command to download user-defined Switch Release event for a switch.
[ABH] is two byte and must be sent in ASCII HEX format (41 42).
[Module #] is one byte with value of 01H to 10H and must be sent in ASCII HEX format.
[number] is one byte which indicates the number of bytes. Only the lower nibble is used.
[string] may consist of up to a maximum of 15 bytes according to the lower nibble of the [number].
All default values for this section are 00H.
Command to download user-defined Image Press event for an address.
[BBH] is two byte and must be sent in ASCII HEX format (42 42).
[Address] is one byte with value of 01H to FFH and must be sent in ASCII HEX format.
[number] is one byte which indicates the number of bytes. Only the lower nibble is used. If B4=1 then the
string will be repeatedly send while the Image is pressed.
[string] may consist of up to a maximum of 15 bytes according to the lower nibble of the [number].
All default values for this section are 00H.
Command to download user-defined Image Release event for an address.
[BCH] is two byte and must be sent in ASCII HEX format (42 43).
[Address] is one byte with value of 01H to FFH and must be sent in ASCII HEX format.
[number] is one byte which indicates the number of bytes. Only the lower nibble is used. If B4=1 then the
string will be repeatedly send while the Image is pressed.
[string] may consist of up to a maximum of 15 bytes according to the lower nibble of the [number].
All default values for this section are 00H.
There are 256 fonts (00H to FFH) in each font set. The default bit map look-up tables are created for English
ASCII characters (20H to 7FH). The default values for rest of the fonts are 00H.
IS-C1603 Intelligent Controller Users Manual C.doc
This command sets user-defined actions taken when the specified switch is released using the look-up
table.
This command sets user-defined actions taken when any switch with the Image associated with the
specified address is pressed using the look-up table.
This command sets user-defined actions taken when any switch with the Image associated with the
specified address is released using the look-up table.
command format:
transmit format:
command format:
transmit format:
command format:
transmit format:
b. Font-Set Look-up Table:
Toll Free 1.877.2BUYNKK (877.228.9655) • Phone [phone] • Fax [phone]
(xxH) (xxAH)
(xxH) (xxAH)
(xxH) (xxAH)
21H
21H
21H
IS-C1603 Intelligent Controller Users
www.nkkswitches.com • Email [e-mail]
[ABH] [Module #] [number] [string]
[BBH] [Address] [number] [string]
[BCH] [Address] [number] [string]
(xxAH)
(xxAH)
(xxAH)
Manual
(xxH)
(xxH)
(xxH)
(xxH)
(xxH)
(xxH)
Page 17 of 45
0110