IS-L0102-IS15ABCP4CF NKK Switches, IS-L0102-IS15ABCP4CF Datasheet - Page 20

• Manufacturer Part Number: IS-L0102-IS15ABCP4CF
• Description: BOARD LOGIC IS15ABCP4CF & AT548
• Manufacturer: NKK Switches

Specifications of IS-L0102-IS15ABCP4CF

• Accessory Type: Logic Board
• For Use With/related Products: Standard SmartSwitch™
• For Use With: 360-2330 - SMARTSWITCH STD RED/GRN LED
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7850 East Gelding Drive • Scottsdale, AZ 85260-3420
[98H] is two byte and must be sent in ASCII HEX format (39 38).
[Animation Timer] is one byte and must be sent twice in ASCII HEX format. The default value is 10H.
Command to set the Animation Multiplier.
[99H] is two byte and must be sent in ASCII HEX format (39 39).
[Animation Multiplier] is one byte and must be sent twice in ASCII HEX format. The default value is 05H.
Command to set the Repeat timer for user-defined Image Press event.
[ECH] is two byte and must be sent in ASCII HEX format (45 43).
[Timer] is one byte and must be sent twice in ASCII HEX format. The default value is 08H. Approximate
time is Timer x 20ms.
Command to set the number of Modules attached to the controller.
[E9H] is two byte and must be sent in ASCII HEX format (45 39).
[# of Modules] is one byte with value of 01H to 10H and must be sent twice in ASCII HEX format. This
command goes into effect after the following power up / reboot.
The controller features can be customized based on customer requirements by manipulating the settings of the
Flags. There are three Flag bytes and a command for setting each Flag. The changes go into effect after the
following power up / reboot.
Command to set a Flag.
IS-C1603 Intelligent Controller Users Manual C.doc
8. Setting the Flags
This command sets the multiplier value for animations.
This command sets the time between repeated transmissions of the user-defined Image press event data
when the Image is pressed.
This command sets the number of Modules attached to the controller.
command format:
transmit format:
command format:
transmit format:
command format:
transmit format:
command format:
transmit format:
Toll Free 1.877.2BUYNKK (877.228.9655) • Phone [phone] • Fax [phone]
(xxH) (xxAH)
(xxH) (xxAH)
(xxH) (xxAH) (xxAH) (xxAH)
(xxH) (xxAH)
21H
21H
21H
21H
IS-C1603 Intelligent Controller Users
www.nkkswitches.com • Email [e-mail]
[ECH] [Timer] [Timer]
[E9H]
[98H]
[99H]
[Animation Timer] [Animation Timer]
[Animation Multiplier] [Animation Multiplier]
[# of Modules] [# of Modules]
(xxAH)
(xxAH)
Manual
(xxAH)
(xxAH)
(xxAH)
(xxAH)
Page 20 of 45
0110