LPC2478-STK Olimex Ltd., LPC2478-STK Datasheet - Page 10

• Manufacturer Part Number: LPC2478-STK
• Description: MCU, MPU & DSP Development Tools DEV BRD FOR LPC2478 64MB SDRAM 100MBIT
• Manufacturer: Olimex Ltd.

Specifications of LPC2478-STK

• Processor To Be Evaluated: LPC2478
• Interface Type: RS-232, Ethernet, USB, PS2, CAN, JTAG
• Dimensions: 134.6 mm x 101.6 mm
• Operating Supply Voltage: 3.3 V
• Tool Type: Development Kit
• Core Architecture: ARM
• Cpu Core: ARM7TDMI-S
• Data Bus Width: 32 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1701509 25R4708

JUMPER DESCRIPTION:
IrDA connector.
the on board LCD panel.
means that if you have only
the jumpers of both devices should be
If you have more than two devices, only the two end-
CAN_D
CAN_T
-10V_E
15V_E
3.3V_E
3.3VA_E
VREF_E
IRDA_LS_E
I2SRX_SDA
devices should be closed.
disabled.
Default state is open.
no IrDA
the on
the VDD1- 10 pins of the MCU.
Default state is opened if your board doesn't have an
voltage to the VREF pin of the MCU.
each end of
This jumper, when closed, supplies 3.3 V voltage to
the VDDA pin of the MCU.
This jumper, when closed, supplies 15 V voltage to to
This jumper, when closed, supplies -10 V voltage to
This jumper, when closed, supplies 3.3 V voltage to
Default state is closed.
IRDA_LowSpeed_Enable jumper – opened if there is
This jumper, when closed, supplies 3.3 V reference
Default state is closed.
This jumper assures correct work of the CAN. At
Default state is closed.
Default state is closed.
Default state is closed.
Default state is closed.
Page 10
CAN Disable. If this jumper is closed, the CAN is
board LCD panel.
module or it is disabled.
the bus it should be closed. This
two devices with CAN,
closed.