LPC2478-STK Olimex Ltd., LPC2478-STK Datasheet - Page 11

• Manufacturer Part Number: LPC2478-STK
• Description: MCU, MPU & DSP Development Tools DEV BRD FOR LPC2478 64MB SDRAM 100MBIT
• Manufacturer: Olimex Ltd.

Specifications of LPC2478-STK

• Processor To Be Evaluated: LPC2478
• Interface Type: RS-232, Ethernet, USB, PS2, CAN, JTAG
• Dimensions: 134.6 mm x 101.6 mm
• Operating Supply Voltage: 3.3 V
• Tool Type: Development Kit
• Core Architecture: ARM
• Cpu Core: ARM7TDMI-S
• Data Bus Width: 32 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1701509 25R4708

IrDA connector.
IrDA connector.
software to program the
used in combination with the RST_E jumper.
AOUT
RC
RW
RS
TC
TW
TS
ISP_E
RST_E
IrDA module or it is disabled.
If you put this jumper, you enable the ISP (In-System
Programming). This is used when you want external
IrDA module or it is disabled.
This jumper, when closed, outputs the LCD[1] signal
from the LPC2478 to the TFT display. If it is open, pin
166 of the LCP2478 is connected to EXT-5.
This jumper, when closed, outputs the LCD[9] signal
from the LPC2478 to the TFT display. If it is open, pin
162 of the LCP2478 is connected to EXT-7.
This jumper, when closed, outputs the LCD[8] signal
from the LPC2478 to the TFT display. If it is open, pin
164 of the LCP2478 is connected to EXT-6.
This jumper, when closed, outputs the LCD[16] signal
from the LPC2478 to the TFT display. If it is open, pin
160 of the LCP2478 is connected to EXT-8.
Default state is opened if your board doesn't have an
Default state is opened if your board doesn't have an
Default state is closed.
Default state is closed.
Default state is closed.
Default state is closed.
Default state is closed.
This jumper, when closed, outputs the LCD[17] signal
from the LPC2478 to the TFT display. If it is open, pin
158 of the LCP2478 is connected to EXT-9.
Default state is closed.
This jumper, when closed, outputs the LCD[0] signal
from the LPC2478 to the TFT display. If it is open, pin
168 of the LCP2478 is connected to EXT-4.
Default state is open.
IrDA RX output pin jumper – opened if there is no
IrDA TX input pin jumper – opened if there is no
Page 11
LCP2478. This jumper is