LPC2478-STK Olimex Ltd., LPC2478-STK Datasheet - Page 2

• Manufacturer Part Number: LPC2478-STK
• Description: MCU, MPU & DSP Development Tools DEV BRD FOR LPC2478 64MB SDRAM 100MBIT
• Manufacturer: Olimex Ltd.

Specifications of LPC2478-STK

• Processor To Be Evaluated: LPC2478
• Interface Type: RS-232, Ethernet, USB, PS2, CAN, JTAG
• Dimensions: 134.6 mm x 101.6 mm
• Operating Supply Voltage: 3.3 V
• Tool Type: Development Kit
• Core Architecture: ARM
• Cpu Core: ARM7TDMI-S
• Data Bus Width: 32 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1701509 25R4708

INTRODUCTION:
BOARD FEATURES:
ELECTROSTATIC WARNING:
BOARD USE REQUIREMENTS:
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
LPC-2478STK is a starter kit which uses MCU LPC2478 from NXP. This
powerful MCU supports various serial interfaces such as USB host, USB
device, UART, CAN, etc. In addition you will find also audio input and output
as well as MP3 decoder, digital accelerometer, JTAG, Ethernet, touchscreen
TFT display and SD/MMC card connector on this board. All this along with
the ARM7TDMI-S™ architecture and uC Linux allow you to build a diversity
of powerful applications to be used in a wide range of situations.
The LPC-2478STK board is shipped in protective anti-static packaging. The
board must not be subject to high electrostatic potentials. General practice
for working with static sensitive devices should be applied when working with
this board.
Cables:
MCU: LPC2478
MP3 decoder DSP + codec VS1002D
3-axis digital accelerometer with 11-bit accuracy
64 MB SDRAM
USB host connector
USB device connector
IrDA transceiver (optional)
MICTOR Trace connector (optional)
PS2 keyboard connector
100Mbit Ethernet
CAN driver and connector
RS232 with ICSP control
SD/MMC card connector
JTAG connector
Reset button and circuit
2 buttons
1 trimpot
UEXT connector
Audio IN
Audio OUT
RTC battery
FR-4, 1.5 mm, red soldermask, component print
Dimensions: 134.6x101.5mm (5.3x4.0'')
LCD 3.5'' 320x 24-bit color TFT with backlight and touchscreen
You will need different cables depending on the used
programming/debugging tool. If you use Olimex's ARM-JTAG,
you will need a LPT cable. If you use ARM-USB-OCD or ARM-
USB-TINY, you will need USB A-B cable. If you use a software
Page 2