142-0403-101 Emerson Network Power, 142-0403-101 Datasheet - Page 15

• Manufacturer Part Number: 142-0403-101
• Description: CONN PLUG RIGHT ANGLE CRIMP GOLD
• Manufacturer: Emerson Network Power
• Series: SMAr
• Type: Cable Plugr

Specifications of 142-0403-101

• Connector Style: SMA
• Connector Type: Plug, Male Pins
• Contact Termination: Crimp and Solder
• Impedance: 50 Ohm
• Mounting Type: Free Hanging (In-Line), Right Angle
• Fastening Type: Threaded
• Cable Group: RG-161, 174, 188, 316, LMR-100
• Frequency - Max: 12.4GHz
• Frequency-max: 12.4GHz
• Body Style: Right Angle
• Cable Type: RG 161/U, 174, 188, 316, LMR100, HPF100, RF100
• Features: Captivated contact
• Frequency Range: 0 GHz to to 12.4 GHz
• Housing Material: Brass
• Mounting Angle: Right
• Operating Temperature Range: - 65 C to + 165 C
• Rf Series: SMA
• Product: Various Connectors
• Contact Plating: Gold
• Shell Plating: Gold
• Termination Style: Crimp
• Maximum Frequency: 12.4 GHz
• Angle: Right-Angle
• Finish, Housing: Gold
• Material, Contact: Brass
• Material, Dielectric: TFE
• Material, Housing: Brass
• Primary Type: SMA
• Special Features: Captivated Contact
• Termination: Crimp
• Voltage, Rating: 250 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Color: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 140-0403-101; 1420403101; J510

1. Identify connector parts. (6 piece parts -
2. Strip cable to dimensions shown. Do not nick
3. Flare braid and slide cable into clamp stem.
4. Arrange braid uniformly around clamp stem.
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
SMA CLAMP TYPE STRAIGHT
PLUGS,STRAIGHT JACKS, AND
STRAIGHT BULKHEAD
JACKS FOR FLEXIBLE CABLE
Johnson Components
Jack
Jack
Plug
except bulkhead)
braid or center conductor. A wire stripper of
correct size is recommended for this step.
Twist stranded center conductor into tight
bundle and tin (optional). Slide clamp nut and
clamp cone onto cable as shown. Clamp cone
must be oriented as shown for each size of
cable. The RG 58/142 clamp cone slides over
braid and against jacket.
Place rear insulator and center contact over
center conductor and position as shown for
different cable sizes. Solder center conductor
to contact through the solder hole. Solder
must not be allowed to gather and run on
outside of contact. Use a minimum amount of
solder for a good joint. .020 (0.51) diameter
solder is recommended.
Slide center contact assembly into body. Slide
clamp nut against clamp cone and braid and
tighten to 10 in.-lb. torque.
®
• P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: [phone] • www.johnsoncomp.com
RG 58/u, 141, 303
RG 58/u, 141, 303
RG 58/u, 141, 303
RG 161/u, 174,
RG 161/u, 174,
RG 161/u, 174,
RG 178/u, 196
RG 178/u, 196
RG 178/u, 196
RG-142, 223,
RG-142, 223,
RG-142, 223,
188, 316
188, 316
188, 316
GROUP
CABLE
55, 400
55, 400
55, 400
142-0102-401/406
142-0103-401/406
142-0107-401/406
142-0107-401/406
142-0202-011/016
142-0203-011/016
142-0207-011/016
142-0207-011/016
142-0102-011/016
142-0103-011/016
142-0107-011/016
142-0107-011/016
NUMBER
PART
.133 (3.38) .053 (1.35) .085 (2.16) .105 (2.67)
.133 (3.38) .053 (1.35) .085 (2.16) .128 (3.25)
.285 (7.24) .165 (4.19)
.285 (7.24) .165 (4.19)
.285 (7.24) .165 (4.19)
.285 (7.24) .165 (4.19)
.225 (5.72) .145 (3.68)
.285 (7.24) .165 (4.19)
“A”
Instructions
Assembly
“B”
NONE
NONE
NONE
NONE
NONE
NONE
“C”
.105 (2.67)
.213 (5.41)
.213 (5.41)
.105 (2.67)
.128 (3.25)
.213 (5.41)
.213 (5.41)
.128 (3.25)
.213 (5.41)
.213 (5.41)
CRIMP
HEX
15