142-0403-101 Emerson Network Power, 142-0403-101 Datasheet - Page 6

• Manufacturer Part Number: 142-0403-101
• Description: CONN PLUG RIGHT ANGLE CRIMP GOLD
• Manufacturer: Emerson Network Power
• Series: SMAr
• Type: Cable Plugr

Specifications of 142-0403-101

• Connector Style: SMA
• Connector Type: Plug, Male Pins
• Contact Termination: Crimp and Solder
• Impedance: 50 Ohm
• Mounting Type: Free Hanging (In-Line), Right Angle
• Fastening Type: Threaded
• Cable Group: RG-161, 174, 188, 316, LMR-100
• Frequency - Max: 12.4GHz
• Frequency-max: 12.4GHz
• Body Style: Right Angle
• Cable Type: RG 161/U, 174, 188, 316, LMR100, HPF100, RF100
• Features: Captivated contact
• Frequency Range: 0 GHz to to 12.4 GHz
• Housing Material: Brass
• Mounting Angle: Right
• Operating Temperature Range: - 65 C to + 165 C
• Rf Series: SMA
• Product: Various Connectors
• Contact Plating: Gold
• Shell Plating: Gold
• Termination Style: Crimp
• Maximum Frequency: 12.4 GHz
• Angle: Right-Angle
• Finish, Housing: Gold
• Material, Contact: Brass
• Material, Dielectric: TFE
• Material, Housing: Brass
• Primary Type: SMA
• Special Features: Captivated Contact
• Termination: Crimp
• Voltage, Rating: 250 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Color: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 140-0403-101; 1420403101; J510

Assembly
Instructions
SMA SOLDER TYPE STRAIGHT PLUGS
FOR SEMI-RIGID CABLE
6
Johnson Components
®
• P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: [phone] • www.johnsoncomp.com
1. Identify connector parts. (3 piece parts)
2. Strip cable to dimensions shown. Do not nick cen-
3. Insert cable into body making sure cable jacket is
4. Snap "C" spring onto connector body groove.
ter conductor. Bevel the cable center conductor
per contact detail of SMA interface on page 26.
flush with front of body. Solder body to cable. Use
a minimum amount of heat to minimize cable in-
sulation movement. Trim expanded cable insula-
tion flush with front of body or fixture body and
cable during soldering to prevent insulation ex-
pansion.
Compress "C" spring using 141-0000-904 com-
pression tool. Install coupling nut onto connector
body. Nut should spin freely.
CABLE GROUP
(.141 semi-rigid)
RG 402/u
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
PART NUMBER
142-0694-031
142-0694-036
INCHES (MILLIMETERS)