MB96F313ASBPMC-GSE2 Fujitsu, MB96F313ASBPMC-GSE2 Datasheet - Page 4

• Manufacturer Part Number: MB96F313ASBPMC-GSE2
• Description: MCU, 16BIT, 16FX, 96K FLASH, 48LQFP
• Manufacturer: Fujitsu

Specifications of MB96F313ASBPMC-GSE2

• No. Of I/o's: 36
• Ram Memory Size: 8KB
• Cpu Speed: 56MHz
• No. Of Timers: 3
• No. Of Pwm Channels: 14
• Digital Ic Case: RoHS Compliant
• Core Size: 16bit
• Program Memory Size: 96KB
• Oscillator Type: Internal, External
• Controller Family/series: MB96310

MB96310 Series
4
Non Maskable Interrupt
External Interrupts
Real Time Clock
Flash Memory
Packages
I/O Ports
Feature
• Can be clocked either from sub oscillator (devices with part number suffix “W”), main
• Facility to correct oscillation deviation of Sub clock or RC oscillator clock (clock
• Read/write accessible second/minute/hour registers
• Can signal interrupts every half second/second/minute/hour/day
• Internal clock divider and prescaler provide exact 1s clock
• Edge sensitive or level sensitive
• Interrupt mask and pending bit per channel
• Each available CAN channel RX has an external interrupt for wake-up
• Selected USART channels SIN have an external interrupt for wake-up
• Disabled after reset
• Once enabled, can not be disabled other than by reset.
• Level high or level low sensitive
• Pin shared with external interrupt 0.
• Virtually all external pins can be used as general purpose I/O
• All push-pull outputs
• Bit-wise programmable as input/output or peripheral signal
• Bit-wise programmable input enable
• Bit-wise programmable input levels: Automotive / CMOS-Schmitt trigger / TTL
• Bit-wise programmable pull-up resistor
• Bit-wise programmable output driving strength for EMI optimization
• 48-pin plastic LQFP M26
• Supports automatic programming, Embedded Algorithm
• Write/Erase/Erase-Suspend/Resume commands
• A flag indicating completion of the algorithm
• Number of erase cycles: 10,000 times
• Data retention time: 20 years
• Erase can be performed on each sector individually
• Sector protection
• Flash Security feature to protect the content of the Flash
• Low voltage detection during Flash erase
oscillator or from the RC oscillator
calibration)
Description
DS07-13808-2E