C500TS502 Omron, C500TS502 Datasheet - Page 9

• Manufacturer Part Number: C500TS502
• Description: RTD INPUT MODULE
• Manufacturer: Omron

Specifications of C500TS502

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Default Ladder Programs
1- -3
1- -3- -1
1- -3- -2
1- -3- -3
1- -4
1- -5
Default Settings
Default Ladder Programs
Reference Manuals
Rotary Switches and Jumpers
Data Format
Memory Map
Default settings for the rotary switches and jumpers, data format, and
memory map are factory set to a 4-wire,100 Ω Platinum RTD. The mode
jumper is set to 2-word mode.
Rotary switches and jumpers are factory set to a 4-wire,100 Ω Platinum RTD.
The mode jumper is set to 2-word mode.
The default data format is signed BCD which gives a resolution of 1
Binary 2’s complement data format gives a resolution of 0.1
fault range is 100 Ω Platinum with data reported in BCD as 8200 for -200
and 0850 for 850
The module has a memory map that is used to store data and select the dif-
ferent functions that the module can perform.
The ladder diagram below is used in conjunction with the default settings. It
can be entered to read the RTD data and alarm flags for each input point into
the data memory (DM) area. This program assumes that the module is in its
factory default settings.
C-series
CV-series
Always ON
Alarm flags and analog conversion data is stored in PLC memory beginning
at the DM address specified in the ladder diagram instruction.
Data in PLC Memory
Always ON
DM N
DM N + 1 to N + 8
C1000H, 2000H Installation Manual
C1000H, 2000H Operation Manual
CV Installation Manual
CV Operation Manual: Ladder Diagram
A50013
25313
[READ(190)
N: Read 9 locations
S: module I/O word
D: Start word to store data in DM
°
C.
READ (88)
#
IR
DM
N=9
xxxx
xxxx
Module alarm flags
Input conversion data in BCD
format, for inputs 1 to 8
9
S=xxxx
Read 9 locations from the Module
Module I/O word from the I/O table
Starting word in DM area to store the
values read from the Module
D=xxxx]
W139
W140
W195
W202
°
C or
Section 1- -4
°
F. The de-
°
C or
°
°
C
F.
3