R88A-CSU010C Omron, R88A-CSU010C Datasheet - Page 296

• Manufacturer Part Number: R88A-CSU010C
• Description: ABSOLUTE ENCODER CABLE,10M
• Manufacturer: Omron

Specifications of R88A-CSU010C

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

CompoBus/S Specifications
j Types of Connection-related Devices
Aside from Masters and Slaves, the following devices are used with a CompoBus/S System.
The following table shows the two cable types and their specifications.
Note Do not use any VCTF cable other than two-core cable.
The following table shows the types of connectors and terminal blocks that can be used.
Note 1. Connect the terminating resistance (i.e., pressure connectors or terminal blocks with termi-
Note 2. Use commercially available terminal blocks for branching or extending VCTF cable.
Note 3. For details regarding connectors and terminal blocks, refer to the CompoBus/S Operation
VCTF (commercially available)
SCA1-4F10 Special Flat Cable (length: 100 m)
Pressure connector for
branching
Pressure connector for
extension
Pressure connector with
terminating resistance
Terminal block with
terminating resistance
Cable Types
Connector and Terminal Block Types
nating resistance) at the end of the main line farthest from the Master.
Manual (W266) .
Type
Type
SCN1-TH4
SCN1-TH4E
SCN1-TH4T
SRS1-T
Model
This connector is used for branching from the main line to
branch lines. It can only be used with special flat cable.
This connector is used for extending special flat cable.
This is a connector with terminating resistance. It can only be
used with special flat cable.
This is a terminal block with terminating resistance. It can be
used with either VCTF or special flat cable.
Vinyl cord, VCTF, JIS C 3306
Two-core nominal cross-sectional area: 0.75 mm
Conductor resistance (20 C): 25.1 /km
Nominal cross-sectional area: 0.75 mm
Ambient operating temperature: 60 C max.
(signal line x 2)
(signal line x 2, power line x 2)
Remarks
Specifications
Chapter 6
2
x 4
6-3
2