PN5120A0HN1/C2,151 NXP Semiconductors, PN5120A0HN1/C2,151 Datasheet - Page 70

• Manufacturer Part Number: PN5120A0HN1/C2,151
• Description: IC TRANSMISSION MOD 32-HVQFN
• Manufacturer: NXP Semiconductors

Specifications of PN5120A0HN1/C2,151

• Rf Type: Read / Write
• Frequency: 13.56MHz
• Features: ISO14443-A, ISO14443-B
• Package / Case: 32-VFQFN Exposed Pad
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

NXP Semiconductors
111334
Product data sheet
10.4.1 General
10.4 I
An Inter IC (I
interface to the host controller.
The implemented I
interface specification, rev. 2.1, January 2000. The implemented interface can only act in
Slave mode. Therefore no clock generation and access arbitration is implemented in the
PN512.
The implemented interface is conforming to the I
January 2000. The PN512 can act as a slave receiver or slave transmitter in standard,
Fast mode and High-speed mode.
SDA is a bi-directional one, connected to a positive supply voltage via a current-source or
a pull-up resistor. Both lines, SDA and SCL are set to HIGH level if no data is transmitted.
The PN512 has a 3-state output stage to perform the wired-AND function. Data on the
I
in the Fast mode or up to 3.4 Mbit in the High-speed mode.
If the I
specification on SCL and SDA is activated.
For timing requirements refer to
2
2
Fig 17. I
C-bus can be transferred at data rates of up to 100 kbit in Standard mode, up to 400 kbit
C bus interface
2
Host
Controller
C interface is selected, a spike suppression according to the I
Remark: *depending on the package type.
2
C interface
2
C) bus interface is supported to enable a low cost, low pin count serial bus
2
C interface is implemented according the NXP Semiconductors I
Rev. 3.4 — 8 September 2009
network
pullup
Section 24.9 “I
Configuration
wiring
network
2
pullup
C timing”
2
C-bus specification version 2.1,
Transmission Module
ALE
SDA
SCL
A[3],A[0]*
D[0..5]*
2
C interface
© NXP B.V. 2010. All rights reserved.
PN512
PN512
70 of 131
PUBLIC
2
C