EA-QSB-103 Embedded Artists, EA-QSB-103 Datasheet - Page 15

• Manufacturer Part Number: EA-QSB-103
• Description: MCU, MPU & DSP Development Tools QUICKSTART PROTOTYPE BRD W/ LPC2129 CAN
• Manufacturer: Embedded Artists

Specifications of EA-QSB-103

• Processor To Be Evaluated: LPC2129
• Data Bus Width: 16 bit, 32 bit
• Interface Type: RS-232, CAN, I2C, SPI, UART
• Core: ARM7TDMI-S
• Dimensions: 55 mm x 58 mm
• Maximum Operating Temperature: + 85 C
• Operating Supply Voltage: 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

NXP Semiconductors
Product data sheet
LPC2109_2119_2129_6
6.10.1 Features
6.8.1 Features
6.8.2 ADC features available in LPC2109/2119/2129/01 only
6.9.1 Features
6.10 UARTs
6.8 10-bit ADC
6.9 CAN controllers and acceptance filter
The LPC2109/2119/2129 each contain a single 10-bit successive approximation ADC with
four multiplexed channels.
The LPC2119 and LPC2129 each contain two CAN controllers, while the LPC2109 has
one CAN controller. The CAN is a serial communications protocol which efficiently
supports distributed real-time control with a very high level of security. Its domain of
application ranges from high-speed networks to low-cost multiplex wiring.
The LPC2109/2119/2129 each contain two UARTs. In addition to standard transmit and
receive data lines, the UART1 also provides a full modem control handshake interface.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Measurement range of 0 V to 3 V.
Capable of performing more than 400000 10-bit samples per second.
Burst conversion mode for single or multiple inputs.
Optional conversion on transition on input pin or Timer Match signal.
Every analog input has a dedicated result register to reduce interrupt overhead.
Every analog input can generate an interrupt once the conversion is completed.
The ADC pads are 5 V tolerant when configured for digital I/O function(s).
Data rates up to 1 Mbit/s on each bus.
32-bit register and RAM access.
Compatible with CAN specification 2.0B, ISO 11898-1.
Global Acceptance Filter recognizes 11-bit and 29-bit Rx identifiers for all CAN buses.
Acceptance Filter can provide FullCAN-style automatic reception for selected
Standard identifiers.
16 B Receive and Transmit FIFOs.
Register locations conform to 16C550 industry standard.
Receiver FIFO trigger points at 1 B, 4 B, 8 B, and 14 B.
Built-in fractional baud rate generator covering wide range of baud rates without a
need for external crystals of particular values.
Transmission FIFO control enables implementation of software (XON/XOFF) flow
control on both UARTs.
Rev. 06 — 10 December 2007
LPC2109/2119/2129
Single-chip 16/32-bit microcontrollers
© NXP B.V. 2007. All rights reserved.
15 of 44