ADUC7036BCPZ-RL Analog Devices Inc, ADUC7036BCPZ-RL Datasheet - Page 111
![Flash 96k ARM7 Dual 16-Bit ADC LIN I.C.](/photos/6/50/65022/cp-48-8_sml.jpg)
ADUC7036BCPZ-RL
Manufacturer Part Number
ADUC7036BCPZ-RL
Description
Flash 96k ARM7 Dual 16-Bit ADC LIN I.C.
Manufacturer
Analog Devices Inc
Series
MicroConverter® ADuC7xxxr
Datasheet
1.EVAL-ADUC7036QSPZ.pdf
(132 pages)
Specifications of ADUC7036BCPZ-RL
Core Processor
ARM7
Core Size
16/32-Bit
Speed
20.48MHz
Connectivity
LIN, SPI, UART/USART
Peripherals
PSM, Temp Sensor, WDT
Number Of I /o
9
Program Memory Size
96KB (96K x 8)
Program Memory Type
FLASH
Ram Size
6K x 8
Voltage - Supply (vcc/vdd)
3.5 V ~ 18 V
Data Converters
A/D 2x16b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 115°C
Package / Case
48-LFCSP
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
ADUC7036BCPZ-RL
Manufacturer:
ADI/亚德诺
Quantity:
20 000
SPI Control Register
Name: SPICON
Address: 0xFFFF0A10
Default Value: 0x0000
Access: Read/write
Function: This 16-bit MMR configures the serial peripheral interface.
Table 89. SPICON MMR Bit Designations
Bit
15 to 13
12
11
10
9
8
7
6
5
4
3
2
1
0
Description
Reserved.
Continuous transfer enable.
Set by the user to enable continuous transfer. In master mode, the transfer continues until no valid data is available in
the SPITX register. SS is asserted and remains asserted for the duration of each 8-bit serial transfer until SPITX is empty.
Cleared by the user to disable continuous transfer. Each transfer consists of a single 8-bit serial transfer. If valid data
exists in the SPITX register, a new transfer is initiated after a stall period.
Loopback enable.
Set by the user to connect MISO to MOSI and test software.
Cleared by the user to be in normal mode.
Slave output enable.
Set by the user to enable the slave output.
Cleared by the user to disable the slave output.
Slave select input enable.
Set by the user in master mode to enable the output.
Cleared by the user to disable the output.
SPIRX overflow overwrite enable.
Set by the user; the valid data in the SPIRX register is overwritten by the new serial byte received.
Cleared by the user; the new serial byte received is discarded.
SPITX underflow mode.
Set by the user to transmit the previous data.
Cleared by the user to transmit 0.
Transfer and interrupt mode (master mode).
Set by the user to initiate a transfer with a write to the SPITX register. An interrupt occurs when SPITX is empty.
Cleared by the user to initiate a transfer with a read of the SPIRX register. An interrupt occurs when SPIRX is full.
LSB first transfer enable bit.
Set by the user; the LSB is transmitted first.
Cleared by the user; the MSB is transmitted first.
Reserved.
Serial clock polarity mode bit.
Set by the user; the serial clock idles high.
Cleared by the user; the serial clock idles low.
Serial clock phase mode bit.
Set by the user; the serial clock pulses at the beginning of each serial bit transfer.
Cleared by the user; the serial clock pulses at the end of each serial bit transfer.
Master mode enable bit.
Set by the user to enable master mode.
Cleared by the user to enable slave mode.
SPI enable bit.
Set by the user to enable the SPI.
Cleared by the user to disable the SPI.
Rev. C | Page 111 of 132
ADuC7036