DSPIC33FJ16GP304-E/PT Microchip Technology, DSPIC33FJ16GP304-E/PT Datasheet - Page 116

• Manufacturer Part Number: DSPIC33FJ16GP304-E/PT
• Description: 16-bit DSC, 16KB Flash,40 MIPS,nanoWatt 44 TQFP 10x10x1mm TRAY
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ16GP304-E/PT

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 35
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 13x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 44-TQFP, 44-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DV164033 - KIT START EXPLORER 16 MPLAB ICD2DM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
TABLE 10-1:
10.6.2.2
In contrast to inputs, the outputs of the peripheral pin
select options are mapped on the basis of the pin. In
this case, a control register associated with a particular
pin dictates the peripheral output to be mapped. The
RPORx registers are used to control output mapping.
Like the RPINRx registers, each register contains sets
of 5-bit fields, with each set associated with one RPn
pin (see
value of the bit field corresponds to one of the periph-
erals, and that peripheral’s output is mapped to the pin
(see
The list of peripherals for output mapping also includes
a null value of ‘00000’
technique. This permits any given pin to remain
unconnected from the output of any of the pin
selectable peripherals.
DS70290G-page 116
External Interrupt 1
External Interrupt 2
Timer2 External Clock
Timer3 External Clock
Input Capture 1
Input Capture 2
Input Capture 7
Input Capture 8
Output Compare Fault A
UART1 Receive
UART1 Clear To Send
SPI1 Data Input
SPI1 Clock Input
SPI1 Slave Select Input
Note 1:
Table 10-2
Register 10-10
Unless otherwise noted, all inputs use the Schmitt input buffers.
Output Mapping
and
Input Name
REMAPPABLE PERIPHERAL INPUTS
Figure
through
10-3).
because of the mapping
Register
10-22). The
Function Name
SCK1IN
U1CTS
SS1IN
OCFA
T2CK
T3CK
U1RX
INT1
INT2
SDI1
IC1
IC2
IC7
IC8
(1)
FIGURE 10-3:
U1RTS Output Enable
U1TX Output Enable
OC1 Output Enable
OC2 Output Enable
U1RTS Output
U1TX Output
OC1 Output
OC2 Output
RPINR10
RPINR10
RPINR18
RPINR18
RPINR20
RPINR20
RPINR21
RPINR11
Register
RPINR7
RPINR7
RPINR0
RPINR1
RPINR3
RPINR3
Default
Default
RPnR<4:0>
MULTIPLEXING OF
REMAPPABLE OUTPUT
FOR RPn
18
18
© 2011 Microchip Technology Inc.
19
19
0
0
3
3
4
4
Output Enable
Output Data
Configuration
U1CTSR<4:0>
OCFAR<4:0>
U1RXR<4:0>
SCK1R<4:0>
T2CKR<4:0>
T3CKR<4:0>
SDI1R<4:0>
INT1R<4:0>
INT2R<4:0>
SS1R<4:0>
IC1R<4:0>
IC2R<4:0>
IC7R<4:0>
IC8R<4:0>
Bits
RPn