DSPIC33FJ32GS606-I/MR Microchip Technology, DSPIC33FJ32GS606-I/MR Datasheet - Page 213

• Manufacturer Part Number: DSPIC33FJ32GS606-I/MR
• Description: 16 Bit MCU/DSP 40MIPS 32KB FLASH 64 QFN 9x9x0.9mm TUBE
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ32GS606-I/MR

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, QEI, POR, PWM, WDT
• Number Of I /o: 58
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-VFQFN, Exposed Pad
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

13.0
Timer2 and Timer4 are Type B timers that offer the
following major features:
FIGURE 13-1:
FIGURE 13-2:
 2010 Microchip Technology Inc.
dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
Note 1: This data sheet summarizes the features
2: Some registers and associated bits
TIMER2/3/4/5 FEATURES
TxCK
TxCK
of the dsPIC33FJ32GS406/606/608/610
and
families of devices. It is not intended to be
a comprehensive reference source. To
complement the information in this data
sheet, refer to Section 11. “Timers”
(DS70205) in the “dsPIC33F/PIC24H
Family Reference Manual”, which is avail-
able from the Microchip web site
(www.microchip.com).
described in this section may not be avail-
able on all devices. Refer to Section 4.0
“Memory Organization” in this data
sheet for device-specific register and bit
information.
dsPIC33FJ64GS406/606/608/610
TYPE B TIMER BLOCK DIAGRAM (x = 2, 4)
TYPE C TIMER BLOCK DIAGRAM (x = 3, 5)
F
CY
Sync
TCKPS<1:0>
Prescaler
(/n)
F
CY
TCKPS<1:0>
TCKPS<1:0>
TCKPS<1:0>
Prescaler
Prescaler
Prescaler
Sync
Gate
(/n)
Sync
(/n)
Gate
Sync
(/n)
Preliminary
Falling Edge
Falling Edge
Detect
TGATE
Detect
TCS
TGATE
TCS
• A Type B timer can be concatenated with a
• External clock input (TxCK) is always synchronized
Figure 13-1 shows a block diagram of the Type B timer.
Timer3 and Timer5 are Type C timers that offer the
following major features:
• A Type C timer can be concatenated with a
• At least one Type C timer has the ability to trigger
• The external clock input (TxCK) is always
A block diagram of the Type C timer is shown in
Figure 13-2.
10
00
x1
Type C timer to form a 32-bit timer
to the internal device clock and the clock
synchronization is performed after the prescaler.
Type B timer to form a 32-bit timer
an A/D conversion.
synchronized to the internal device clock and the
clock synchronization is performed before the
prescaler
Note:
10
00
x1
Comparator
Comparator
Timer3 is not available on all devices.
TMRx
TMRx
PRx
PRx
Reset
Equal
Equal
Reset
TGATE
ADC SOC Trigger
TGATE
1
0
1
0
Set TxIF Flag
Set TxIF Flag
DS70591C-page 213