DSPIC33FJ32GS606-I/MR Microchip Technology, DSPIC33FJ32GS606-I/MR Datasheet - Page 245

• Manufacturer Part Number: DSPIC33FJ32GS606-I/MR
• Description: 16 Bit MCU/DSP 40MIPS 32KB FLASH 64 QFN 9x9x0.9mm TUBE
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ32GS606-I/MR

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, QEI, POR, PWM, WDT
• Number Of I /o: 58
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-VFQFN, Exposed Pad
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

REGISTER 16-19: IOCONx: PWM I/O CONTROL REGISTER (CONTINUED)
 2010 Microchip Technology Inc.
bit 3-2
bit 1
bit 0
dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
Note 1: These bits should not be changed after the PWM module is enabled (PTEN = 1).
2: State represents the active/inactive state of the PWM depending on the POLH and POLL bit settings.
CLDAT<1:0>: State
FCLCONx<IFLTMOD> = 0: Normal Fault mode
If current-limit active, then CLDAT<1> provides state for PWMxH
If current-limit active, then CLDAT<0> provides state for PWMxL
FCLCONx<IFLTMOD> = 1: Independent Fault mode
CLDAT<1:0> is ignored
SWAP: SWAP PWMxH and PWMxL pins bit
1 = PWMxH output signal is connected to PWMxL pins; PWMxL output signal is connected to PWMxH
0 = PWMxH and PWMxL pins are mapped to their respective pins
OSYNC: Output Override Synchronization bit
1 = Output overrides via the OVRDAT<1:0> bits are synchronized to the PWM time base
0 = Output overrides via the OVDDAT<1:0> bits occur on next CPU clock boundary
pins
(2)
for PWMxH and PWMxL Pins if CLMOD is Enabled bits
Preliminary
DS70591C-page 245