DSPIC33FJ32GS606-I/MR Microchip Technology, DSPIC33FJ32GS606-I/MR Datasheet - Page 241

• Manufacturer Part Number: DSPIC33FJ32GS606-I/MR
• Description: 16 Bit MCU/DSP 40MIPS 32KB FLASH 64 QFN 9x9x0.9mm TUBE
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ32GS606-I/MR

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, QEI, POR, PWM, WDT
• Number Of I /o: 58
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-VFQFN, Exposed Pad
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

REGISTER 16-15: SPHASE
 2010 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-0
dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
Note 1: If PWMCONx<9> = 0, the following applies based on the mode of operation:
R/W-0
R/W-0
2: If PWMCONx<9> = 1, the following applies based on the mode of operation:
• Complementary, Redundant and Push-Pull Output mode (IOCONx<10:8> = 00, 01, or 10) SPHA-
• True Independent Output mode (IOCONx<10:8> = 11) PHASEx<15:0> = Phase shift value for
• Complementary, Redundant and Push-Pull Output mode (IOCONx<10:8> = 00, 01, or 10) SPHA-
• True Independent Output mode (IOCONx<10:8> = 11) PHASEx<15:0> = Independent time base
• When the PHASEx/SPHASEx register provides the local period, the valid range of values is
SEx<15:0> = Not used
PWMxL only
SEx<15:0> = Not used
period value for PWMxL only
0x0010-0xFFF8.
SPHASEx<15:0>: Secondary Phase Offset bits for PWMxL Output Pin (used in Independent PWM
mode only)
R/W-0
R/W-0
W = Writable bit
‘1’ = Bit is set
x:
R/W-0
R/W-0
PWM SECONDARY PHASE SHIFT REGISTER
R/W-0
R/W-0
SPHASEx<15:8>
Preliminary
SPHASEx<7:0>
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-0
R/W-0
R/W-0
R/W-0
x = Bit is unknown
R/W-0
R/W-0
DS70591C-page 241
R/W-0
R/W-0
bit 8
bit 0