KSZ8851-16MQL Micrel Inc, KSZ8851-16MQL Datasheet - Page 22
![Single Ethernet Port + Generic (16-bit) Bus Interface( )](/photos/6/81/68152/576-128-pqfp_sml.jpg)
KSZ8851-16MQL
Manufacturer Part Number
KSZ8851-16MQL
Description
Single Ethernet Port + Generic (16-bit) Bus Interface( )
Manufacturer
Micrel Inc
Specifications of KSZ8851-16MQL
Controller Type
Ethernet Controller, MAC/PHY
Interface
Bus
Voltage - Supply
1.8V, 2.5V, 3.3V
Operating Temperature
0°C ~ 70°C
Mounting Type
Surface Mount
Package / Case
128-MQFP, 128-PQFP
Operating Supply Voltage (typ)
3.3V
Operating Temperature Classification
Commercial
Mounting
Surface Mount
Pin Count
128
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
576-3292 - BOARD EVALUATION KSZ8851-16MLL
Current - Supply
-
Lead Free Status / RoHS Status
Compliant, Lead free / RoHS Compliant
Other names
576-3253
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
KSZ8851-16MQLI
Manufacturer:
MICREL
Quantity:
1 001
Functional Description
The KSZ8851M is a single-chip Fast Ethernet MAC/PHY controller consisting of a 10/100 physical layer transceiver
(PHY), a MAC, and a Bus Interface Unit (BIU) that controls the KSZ8851M via an 8-bit, 16-bit or 32-bit host bus interface.
The KSZ8851M is fully compliant to IEEE802.3u standards.
Functional Overview
Power Management
The KSZ8851M supports enhanced power management feature in low power state with energy detection to ensure low-
power dissipation during device idle periods. There are four operation modes under the power management function
which is controlled by two bits in PMECR (0xD4) register as shown below:
PMECR[1:0] = 00 Normal Operation Mode
PMECR[1:0] = 01 Energy Detect Mode
PMECR[1:0] = 10 Soft Power Down Mode
PMECR[1:0] = 11 Power Saving Mode
Table 1 indicates all internal function blocks status under four different power management operation modes.
Normal Operation Mode
This is the default setting bit[1:0]=00 in PMECR register after the chip power-up or hardware reset (pin 67). When
KSZ8851M is in this normal operation mode, all PLL clocks are running, PHY and MAC are on and the host interface is
ready for CPU read or write.
During the normal operation mode, the host CPU can set the bit[1:0] in PMECR register to transit the current normal
operation mode to any one of the other three power management operation modes.
Energy Detect Mode
The energy detect mode provides a mechanism to save more power than in the normal operation mode when the
KSZ8851M is not connected to an active link partner. For example, if cable is not present or it is connected to a powered
down partner, the KSZ8851M can automatically enter to the low power state in energy detect mode. Once activity
resumes due to plugging a cable or attempting by the far end to establish link, the KSZ8851M can automatically power up
to normal power state in energy detect mode.
Energy detect mode consists of two states, normal power state and low power state. While in low power state, the
KSZ8851M reduces power consumption by disabling all circuitry except the energy detect circuitry of the receiver. The
energy detect mode is entered by setting bit[1:0]=01 in PMECR register. When the KSZ8851M is in this mode, it will
monitor the cable energy. If there is no energy on the cable for a time longer than pre-configured value at bit[7:0] Go-
Sleep time in GSWUTR register, KSZ8851M will go into a low power state. When KSZ8851M is in low power state, it will
keep monitoring the cable energy. Once the energy is detected from the cable and is continuously presented for a time
longer than pre-configured value at bit[15:8] Wake-Up time in GSWUTR register, the KSZ8851M will enter either the
normal power state if the auto-wakeup enable bit[7] is set in PMECR register or the normal operation mode if both auto-
wakeup enable bit[7] and wakeup to normal operation mode bit[6] are set in PMECR register.
The KSZ8851M will also assert PME output pin if the corresponding enable bit[8] is set in PMECR (0xD4) register or
August 2009
Micrel, Inc.
Internal PLL Clock
Tx/Rx PHY
MAC
Host Interface
Function Blocks
KSZ8851M
Normal mode
Enabled
Enabled
Enabled
Enabled
Table 1. Internal Function Blocks Status
Rx unused block disabled
Power saving mode
Enabled
Enabled
Enabled
Power Management Operation Modes
22
Energy detect mode
Energy detect at Rx
Disabled
Disabled
Disabled
Soft power down mode
KSZ8851-16/32 MQL/MQLI
Disabled
Disabled
Disabled
Disabled
M9999-083109-2.0