194 TPI (Test Products Int), 194 Datasheet - Page 12

• Manufacturer Part Number: 194
• Description: DMM AUTO-RANGE IND 600V CAT IV
• Manufacturer: TPI (Test Products Int)
• Series: 190r
• Type: Digital (DMM)r

Specifications of 194

• Includes: Battery, Test Leads
• Style: Handheld
• Display Digits: 4.75
• Display Type: LCD, Bar Graph
• Display Count: 50000
• Function: Voltage, Current, Resistance, Capacitance, Frequency
• Functions, Extra: Continuity, Diode Test
• Features: Auto Off, Backlight, Hold, Min/Max, RS-232 Port, Sleep
• Ranging: Auto/Manual
• Response: True RMS
• Lead Free Status / RoHS Status: Vendor undefined / Vendor undefined
• Other names: 194TPI; 194TPI; 290-1424; TPI 194; TPI194

21
Application Notes
When measuring the DC current of a
flame controller, follow the steps
under “Measurement Procedure”
above and then proceed with the
following:
•
•
Set up the meter for
making a µA measurement.
Connect the meter to the flame
controller lead by opening the
circuit and inserting the leads in
series with the circuit as shown
in the picture above.
d. Measuring AC Amps
Instrument set-up:
FUNCTION
CAUTION
Do not attempt to make a current measurement with the
test leads connected in parallel with the circuit to be
tested. Test leads must be connected in series with the
circuit.
Do not attempt to make a current measurement of circuits
with more than 600V (1000V-Only 194)present. Instrument
damage and/or personal injury may result.
Measurement Procedure
1. Disconnect power to circuit to be measured.
2. Plug black test lead into the
3. Plug the red test into the
4. Set the rotary switch to the
5. Connect test leads in series to circuit to be measured.
6. Reconnect power to circuit to be measured.
7. Read the current on the LCD.
on the value of current to be measured.
WARNING!
BLACK
TEST LEAD
COM
COM
RED
TEST LEAD
mA
A
:
COM
or
MINIMUM
READING
or
0.001mA
0.0001A
input jack.
input jack depending
function.
MAXIMUM
READING
500.00mA
10.000A
22