5492GPIB B&K Precision, 5492GPIB Datasheet - Page 117

• Manufacturer Part Number: 5492GPIB
• Description: DMM BENCH 5 1/2DGT WITH GPIB CRD
• Manufacturer: B&K Precision
• Type: Digital (DMM)r

Specifications of 5492GPIB

• Includes: Test Leads
• Style: Bench
• Display Digits: 5.5
• Display Type: VFD, Dual
• Display Count: 120000
• Function: Voltage, Current, Resistance, Frequency
• Functions, Extra: Continuity, dB, Diode Test
• Features: Hold, Min/Max, RS-232 Port
• Ranging: Auto/Manual
• Response: True RMS
• Accuracy: +/- 0.012 %
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

C-1 Introduction
C-2 Cleaning the Meter
C-3 Configure the Line Voltage
To avoid electrical shock or damaging the meter, never get water inside the case.
Before setting the line voltage selector, the main power should be turned off and
remove Power cord from the meter. This meter operates on a 100V, 120V, 220V
or 240V AC, 50/60Hz line voltage source.
Appendix C describes the basic maintenance procedures to the 5 1/2 Digit Dual
Display Multimeter.
Before cleaning the meters, make sure the power is switched in OFF position
and the power cord is disconnected from the AC outlet. To clean the meter, wipe
the dirty parts with gauze or soft cloth soaked with diluted neutral detergent. Do
not get too wet to prevent the detergent from penetrating into inside parts and
causing damages. After cleaning, leave the instrument until it dries completely.
Extract the fuse drawer from the AC socket with the aid of a screwdriver to
move the fuse holder with the voltage selector from the fuse holder.
Pull out the fuse link from the fuse holder with the voltage selector. Replace a
new fuse with a rated voltage in accordance with specific required line voltage.
Select the voltage according to users Local line voltage.
If the line voltage used is 230V, be sure to switch the line voltage selection to
240V.
WARNING!
Caution!
117
Maintenance
Appendix C