5492GPIB B&K Precision, 5492GPIB Datasheet - Page 55

• Manufacturer Part Number: 5492GPIB
• Description: DMM BENCH 5 1/2DGT WITH GPIB CRD
• Manufacturer: B&K Precision
• Type: Digital (DMM)r

Specifications of 5492GPIB

• Includes: Test Leads
• Style: Bench
• Display Digits: 5.5
• Display Type: VFD, Dual
• Display Count: 120000
• Function: Voltage, Current, Resistance, Frequency
• Functions, Extra: Continuity, dB, Diode Test
• Features: Hold, Min/Max, RS-232 Port
• Ranging: Auto/Manual
• Response: True RMS
• Accuracy: +/- 0.012 %
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

S2<f><r><x>
Command
In S2 command, <f>, <r>, and <x> parameters are used to set up the
<f> for specifying Measurement functions, <r> for specifying ranges,
<f> is a necessary parameter for specifying the measurement
Because the secondary display can only display DCV, ACV, DCA, ACA,
<r> is an optional parameter for specifying measurement range. The
<x> is an optional parameter for specifying a reading rate. It is defined
If <x> parameter is not specified, the meter will remain on its current
Table 6-6 shows all available S2 command parameters and available
Example 1: “S204S”
Example 2: “S242”
Example 3: “S27”
Table 6-5. Descriptions for S2 Command
Set secondary display of the meter to DCV 120V with manual range
and at slow reading rate.
Set secondary display to DCA 120mA with manual range and the
reading rate will not be affected.
Set secondary display to frequency with auto-ranging and the
reading rate will not be affected.
secondary display measurements:
and <x> for specifying reading rate.
functions. <f> parameter is defined by a numeric value from “0” to
“9” and character “A”.
and Frequency (Hz) functions, therefore, the available parameters
are “0”, “1”, “4”, “5” and “7”.
parameter value can be from “0” to “7”. If <r> parameter is omitted,
<x> parameter should be omitted, too. The meter is set to
auto-ranging and will stay at the current reading rate.
by a character “S”, “M”, or “F”, in which “S” is for slow rate, “M”
for medium rate, and “F” for fast rate
reading rate without change.
combinations.
(<x> is omitted)
(<f>, <r> and <x> are all specified)
(Both <r> and <x> are omitted)
55
Description